Home

Bi-metal M3 Hole Saws with vario-pitched teeth for...

Bi-metal M3 Hole Saws with vario-pitched teeth for applications where fast cutting and low price are the main challenges.

ENT Straight Cutter TC / Two Flutes with grinded bottom cut...

ENT Straight Cutter TC / Two Flutes with grinded bottom cut and 8 mm shank.

Straight bit shank 8mm

Straight bit shank 8mm

For milling a shadow gap or water surge at the basin and water...

For milling a shadow gap or water surge at the basin and water drainage channels on the sink.

V-Groove cutter  108°  S8mm for ALUCOBOND, DiBOND, REYNOBOND

V-Groove cutter  108°  S8mm for ALUCOBOND, DiBOND, REYNOBOND

Rounding over cutter with extended and tapering cutting edges....

Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.

Rounding over cutter with extended and tapering cutting edges....

Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.

Straight bit shank 8mm

Straight bit shank 8mm

Trimming bevel cutter with bearing

Trimming bevel cutter with bearing

Straight bit shank 12 mm

Straight bit shank 12 mm

Ballbearings diameter 16 mm and 12,7 mm included.

Ballbearings diameter 16 mm and 12,7 mm included.

Straight bit shank 12 mm

Straight bit shank 12 mm

Straight bit shank 12 mm

Straight bit shank 12 mm

Replacement tip Straight bit Z=2 Shank 12 mm

Replacement tip Straight bit Z=2 Shank 12 mm

Replacement tip straight cutter internal thread M12x1

Replacement tip straight cutter internal thread M12x1

Replacement tip straight cutter internal thread M12x1

Replacement tip straight cutter internal thread M12x1

Yh102AAM Body in light alloy execution. standard tungsten...

Yh102AAM Body in light alloy execution. standard tungsten carbide profiled knives. profile A mounted on cutter.Profiles B. C and D are optional.Chip thickness limitation and reduced recoil. suitable for manual feed.  Suitable for stock 22-25 mm

Stark profile counterprofile cutterhead 120x40

Stark profile counterprofile cutterhead 120x40

Stark profile counterprofile cutterhead 120x40

Stark profile counterprofile cutterhead 120x40

Replacement tip Straight bit Z=2 Shank 12 mm

Replacement tip Straight bit Z=2 Shank 12 mm

Replacement tip straight cutter internal thread M12x1

Replacement tip straight cutter internal thread M12x1

Replacement tip straight cutter internal thread M12x1

Replacement tip straight cutter internal thread M12x1

Replacement tip Straight bit Z=2 Shank 12 mm

Replacement tip Straight bit Z=2 Shank 12 mm

Planing cutterhead in light alloy execution fitted with HSS...

Planing cutterhead in light alloy execution fitted with HSS planing knives, solid carbideknives can be obtained in addition used in planing and moulding machines. Patented centrifugal clampingsystem for fast, precise and comfortable knife exchange, further dimensions on request, suitable...

Planing cutterhead in light alloy execution fitted with HSS...

Planing cutterhead in light alloy execution fitted with HSS planing knives, solid carbideknives can be obtained in addition used in planing and moulding machines. Patented centrifugal clampingsystem for fast, precise and comfortable knife exchange, further dimensions on request, suitable...

Planing cutterhead in light alloy execution fitted with HSS...

Planing cutterhead in light alloy execution fitted with HSS planing knives, solid carbideknives can be obtained in addition used in planing and moulding machines. Patented centrifugal clampingsystem for fast, precise and comfortable knife exchange, further dimensions on request, suitable...

Planing cutterhead in light alloy execution fitted with HSS...

Planing cutterhead in light alloy execution fitted with HSS planing knives, solid carbideknives can be obtained in addition used in planing and moulding machines. Patented centrifugal clampingsystem for fast, precise and comfortable knife exchange, further dimensions on request, suitable...

Planing cutterhead in light alloy execution fitted with HSS...

Planing cutterhead in light alloy execution fitted with HSS planing knives, solid carbideknives can be obtained in addition used in planing and moulding machines. Patented centrifugal clampingsystem for fast, precise and comfortable knife exchange, further dimensions on request, suitable...

Planing cutterhead in light alloy execution fitted with HSS...

Planing cutterhead in light alloy execution fitted with HSS planing knives, solid carbideknives can be obtained in addition used in planing and moulding machines. Patented centrifugal clampingsystem for fast, precise and comfortable knife exchange, further dimensions on request, suitable...