Home

Bi-metal M3 Hole Saws with vario-pitched teeth for...

Bi-metal M3 Hole Saws with vario-pitched teeth for applications where fast cutting and low price are the main challenges.

Bi-metal M3 Hole Saws with vario-pitched teeth for...

Bi-metal M3 Hole Saws with vario-pitched teeth for applications where fast cutting and low price are the main challenges.

ENT Straight Cutter TC / Two Flutes with grinded bottom cut...

ENT Straight Cutter TC / Two Flutes with grinded bottom cut and 8 mm shank.

For use on twist drills with a 10 mm shank and a diameter of 4...

For use on twist drills with a 10 mm shank and a diameter of 4 mm to 10 mm.The countersinkis guided to the shank via the drill spiral and fastened there.

For use on twist drills with a 10 mm shank and a diameter of 4...

For use on twist drills with a 10 mm shank and a diameter of 4 mm to 10 mm.The countersinkis guided to the shank via the drill spiral and fastened there.

Face milling bit HW Z=2 D=20 L=13 GL=45 S=8

Face milling bit HW Z=2 D=20 L=13 GL=45 S=8

Straight bit shank 8mm

Straight bit shank 8mm

Convient pour : aluminium, cuivre, plastiques

Convient pour : aluminium, cuivre, plastiques

Dovetail bit HW Z=2 D=20 A=10 degrees L=16 GL=52 S=10

Dovetail bit HW Z=2 D=20 A=10 degrees L=16 GL=52 S=10

Straight bit shank 8mm

Straight bit shank 8mm

V-Groove cutter  90°  S8mm for ALUCOBOND, DiBOND, REYNOBOND

V-Groove cutter  90°  S8mm for ALUCOBOND, DiBOND, REYNOBOND

For milling a shadow gap or water surge at the basin and water...

For milling a shadow gap or water surge at the basin and water drainage channels on the sink.

Straight bit shank 8mm

Straight bit shank 8mm

V-Groove cutter  108°  S8mm for ALUCOBOND, DiBOND, REYNOBOND

V-Groove cutter  108°  S8mm for ALUCOBOND, DiBOND, REYNOBOND

Guttering cutter

Guttering cutter

Straight bit shank 8mm

Straight bit shank 8mm

Guttering cutter

Guttering cutter

Straight bit shank 8mm

Straight bit shank 8mm

Ballbearings diameter 16 mm and 12,7 mm included.

Ballbearings diameter 16 mm and 12,7 mm included.

Rounding over cutter with extended and tapering cutting edges....

Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.

Rounding over cutter with extended and tapering cutting edges....

Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.

Titman Staff / corner bead bit with bearing HW Z=2 D=20 L=12...

Titman Staff / corner bead bit with bearing HW Z=2 D=20 L=12 R=2 S=8

Straight bit shank 8mm

Straight bit shank 8mm

Radius engraving cutter These double-edged cutters create a...

Radius engraving cutter These double-edged cutters create a flat of approx. 1 mm at the bottom.

Straight bit shank 8mm

Straight bit shank 8mm

Trimming bevel cutter with bearing

Trimming bevel cutter with bearing

Straight bit shank 12 mm

Straight bit shank 12 mm

Straight bit shank 12 mm

Straight bit shank 12 mm