Home

Bi-metal M3 Hole Saws with vario-pitched teeth for...

Bi-metal M3 Hole Saws with vario-pitched teeth for applications where fast cutting and low price are the main challenges.

ENT Straight Cutter TC / Two Flutes with grinded bottom cut...

ENT Straight Cutter TC / Two Flutes with grinded bottom cut and 8 mm shank.

Straight bit shank 8mm

Straight bit shank 8mm

For milling a shadow gap or water surge at the basin and water...

For milling a shadow gap or water surge at the basin and water drainage channels on the sink.

V-Groove cutter  108°  S8mm for ALUCOBOND, DiBOND, REYNOBOND

V-Groove cutter  108°  S8mm for ALUCOBOND, DiBOND, REYNOBOND

Rounding over cutter with extended and tapering cutting edges....

Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.

Rounding over cutter with extended and tapering cutting edges....

Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.

Straight bit shank 8mm

Straight bit shank 8mm

Trimming bevel cutter with bearing

Trimming bevel cutter with bearing

Straight bit shank 12 mm

Straight bit shank 12 mm

Ballbearings diameter 16 mm and 12,7 mm included.

Ballbearings diameter 16 mm and 12,7 mm included.

Straight bit shank 12 mm

Straight bit shank 12 mm

Groover D=80 L=4 with bore 12 mm

Groover D=80 L=4 with bore 12 mm

Groover D=80 L=4 with bore 12 mm

Groover D=80 L=4 with bore 12 mm

Groover D=80 L=4 with bore 12 mm

Groover D=80 L=4 with bore 12 mm

Straight bit shank 12 mm

Straight bit shank 12 mm

Groover D=80 L=4 with bore 12 mm

Groover D=80 L=4 with bore 12 mm

Overlapped trimmer with interchangeable knives 80 x 25 x...

Overlapped trimmer with interchangeable knives 80 x 25 x 16+2KN N3401N0428 RS10 Rough trimming unit

Groover D=80 L=4 with bore 12 mm

Groover D=80 L=4 with bore 12 mm

Replacement tip Straight bit Z=2 Shank 12 mm

Replacement tip Straight bit Z=2 Shank 12 mm

Replacement tip straight cutter internal thread M12x1

Replacement tip straight cutter internal thread M12x1

Replacement tip straight cutter internal thread M12x1

Replacement tip straight cutter internal thread M12x1

Helical head for medium finishing with body in light alloy...

Helical head for medium finishing with body in light alloy equipped with 12 pieces 14x14x2 knives (600201) in HW with four cutting edges. 

Replacement tip Straight bit Z=2 Shank 12 mm

Replacement tip Straight bit Z=2 Shank 12 mm

Replacement tip straight cutter internal thread M12x1

Replacement tip straight cutter internal thread M12x1

Replacement tip straight cutter internal thread M12x1

Replacement tip straight cutter internal thread M12x1

Replacement tip Straight bit Z=2 Shank 12 mm

Replacement tip Straight bit Z=2 Shank 12 mm

Helical head for medium finishing with body in light alloy 

Helical head for medium finishing with body in light alloy 

Helical head for medium finishing with body in light alloy 

Helical head for medium finishing with body in light alloy