Home

Convient pour : acier, acier inoxydable, fonte, aluminium,...

Convient pour : acier, acier inoxydable, fonte, aluminium, cuivre et plastiques.

Convient à: Acier, Acier inoxydable, Fonte, Aluminium et cuivre

Convient à: Acier, Acier inoxydable, Fonte, Aluminium et cuivre

Convient à: Acier, Acier inoxydable, Fonte, Aluminium et cuivre

Convient à: Acier, Acier inoxydable, Fonte, Aluminium et cuivre

Convient pour : acier, acier inoxydable, fonte, aluminium,...

Convient pour : acier, acier inoxydable, fonte, aluminium, cuivre et plastiques.

Solid carbide milling cutters for plastic processing,...

Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation

Solid carbide milling cutters for plastic processing,...

Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation

ENT Straight Cutter TC / One Flute with 8 mm shank

ENT Straight Cutter TC / One Flute with 8 mm shank

Weather strip cutter Straight

Weather strip cutter Straight

Weather strip cutter Straight

Weather strip cutter Straight

Convient pour : acier, acier inoxydable, fonte, aluminium,...

Convient pour : acier, acier inoxydable, fonte, aluminium, cuivre et plastiques.

Straight cutter d=4 mm internal thread M10x1.5

Straight cutter d=4 mm internal thread M10x1.5

Weather strip cutter Straight 4mm

Weather strip cutter Straight 4mm

Straight bit shank 8mm

Straight bit shank 8mm

Straight bit shank 6 mm

Straight bit shank 6 mm

Straight bit shank 8mm

Straight bit shank 8mm

Straight bit shank 6 mm

Straight bit shank 6 mm

Straight bit shank 12 mm

Straight bit shank 12 mm

Straight bit shank 12 mm

Straight bit shank 12 mm

Straight bit shank 8mm

Straight bit shank 8mm

Straight bit shank 8mm

Straight bit shank 8mm

Dovetail bit HW Z=2 D=12 A=10° L=10 GL=46 S=8

Dovetail bit HW Z=2 D=12 A=10° L=10 GL=46 S=8

Dowel drill bit  S10 mm Lefthand rot.

Dowel drill bit  S10 mm Lefthand rot.

Dowel drill bit  S10 mm Lefthand rot.

Dowel drill bit  S10 mm Lefthand rot.

Dowel drill bit   L105  S10 mm Righthand rot.

Dowel drill bit   L105  S10 mm Righthand rot.

Dowel drill bit   L105  S10 mm Righthand rot.

Dowel drill bit   L105  S10 mm Righthand rot.

Dowel drill bit  S10 mm Lefthand rot.

Dowel drill bit  S10 mm Lefthand rot.

Dowel drill bit   L105  S10 mm Righthand rot.

Dowel drill bit   L105  S10 mm Righthand rot.

Dowel drill bit  S10 mm Lefthand rot.

Dowel drill bit  S10 mm Lefthand rot.

Dowel drill bit   L105  S10 mm Righthand rot.

Dowel drill bit   L105  S10 mm Righthand rot.