Home

Solid carbide milling cutters for plastic processing,...

Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation

Single flute cutter for plastic and aluminium

Single flute cutter for plastic and aluminium

Convient pour : acier, acier inoxydable, fonte, aluminium,...

Convient pour : acier, acier inoxydable, fonte, aluminium, cuivre et plastiques.

JVL Chamfer bit 38.1 mm  45° with 8mm shank

JVL Chamfer bit 38.1 mm  45° with 8mm shank

Single flute cutter for plastic and aluminium

Single flute cutter for plastic and aluminium

Convient pour : acier, acier inoxydable, fonte, aluminium,...

Convient pour : acier, acier inoxydable, fonte, aluminium, cuivre et plastiques.

Convient à: Acier, Acier inoxydable, Fonte, Aluminium et cuivre

Convient à: Acier, Acier inoxydable, Fonte, Aluminium et cuivre

Convient à: Acier, Acier inoxydable, Fonte, Aluminium et cuivre

Convient à: Acier, Acier inoxydable, Fonte, Aluminium et cuivre

Convient à: Acier, Acier inoxydable, Fonte, Aluminium et cuivre

Convient à: Acier, Acier inoxydable, Fonte, Aluminium et cuivre

Convient à: Acier, Acier inoxydable, Fonte, Aluminium et cuivre

Convient à: Acier, Acier inoxydable, Fonte, Aluminium et cuivre

Solid carbide milling cutters for plastic processing,...

Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation

Convient à: Acier, Acier inoxydable, Fonte, Aluminium et cuivre

Convient à: Acier, Acier inoxydable, Fonte, Aluminium et cuivre

ENT Straight Cutter TC / Two Flutes with grinded bottom cut...

ENT Straight Cutter TC / Two Flutes with grinded bottom cut and 8 mm shank.

Solid carbide milling cutters for plastic processing,...

Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation

Double flute milling cutter for plastic and aluminium

Double flute milling cutter for plastic and aluminium

Double flute milling cutter for plastic and aluminium

Double flute milling cutter for plastic and aluminium

ENT 10354 Straight Cutter with Centre Tip 4 x 12 x 50 mm with...

ENT 10354 Straight Cutter with Centre Tip 4 x 12 x 50 mm with 8 mm shank.

Spiral finishing cutter upcut Z2

Spiral finishing cutter upcut Z2

Spiral finishing cutter downcut Z2

Spiral finishing cutter downcut Z2

Straight cutter for Plastics Suitable for: Acrylonitrile...

Straight cutter for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic, Plexi etc.)

Spiral cutter Z1 Negative - Down cut for Plastics Suitable...

Spiral cutter Z1 Negative - Down cut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)

Spiral cutter Z1 Positive - Upcut for Plastics Suitable for:...

Spiral cutter Z1 Positive - Upcut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)

Spiral cutter Z2 Positive - Upcut for Plastics Suitable for:...

Spiral cutter Z2 Positive - Upcut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)

Spiral finishing cutter upcut Z2

Spiral finishing cutter upcut Z2

ENT 16200 Dovetail Cutter with Ball Bearing 12mm 14° 

ENT 16200 Dovetail Cutter with Ball Bearing 12mm 14° 

Spiral finishing cutter downcut Z2

Spiral finishing cutter downcut Z2

Solid carbide milling cutter with rounded chip chamber and...

Solid carbide milling cutter with rounded chip chamber and mirror grinding.Optimized cutting geometry for processing all non-ferrous metals.

Spiral cutter Z1 Negative - Down cut for Plastics Suitable...

Spiral cutter Z1 Negative - Down cut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)

Solid carbide milling cutter with rounded chip chamber and...

Solid carbide milling cutter with rounded chip chamber and mirror grinding.Optimized cutting geometry for processing all non-ferrous metals.

Spiral cutter Z1 Positive - Upcut for Plastics Suitable for:...

Spiral cutter Z1 Positive - Upcut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)