Home

Solid carbide milling cutters for plastic processing,...

Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation

Convient pour : acier, acier inoxydable, fonte, aluminium,...

Convient pour : acier, acier inoxydable, fonte, aluminium, cuivre et plastiques.

Convient à: Acier, Acier inoxydable, Fonte, Aluminium et cuivre

Convient à: Acier, Acier inoxydable, Fonte, Aluminium et cuivre

Solid carbide milling cutters for plastic processing,...

Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation

Solid carbide milling cutters for plastic processing,...

Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation

Double flute milling cutter for plastic and aluminium

Double flute milling cutter for plastic and aluminium

Double flute milling cutter for plastic and aluminium

Double flute milling cutter for plastic and aluminium

Spiral finishing cutter upcut Z2

Spiral finishing cutter upcut Z2

Spiral finishing cutter downcut Z2

Spiral finishing cutter downcut Z2

Spiral cutter Z2 Positive - Upcut for Plastics Suitable for:...

Spiral cutter Z2 Positive - Upcut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)

Spiral finishing cutter upcut Z2

Spiral finishing cutter upcut Z2

Spiral finishing cutter downcut Z2

Spiral finishing cutter downcut Z2

Solid carbide milling cutter with rounded chip chamber and...

Solid carbide milling cutter with rounded chip chamber and mirror grinding.Optimized cutting geometry for processing all non-ferrous metals.

Dovetail bit HW Z=2 D=14 A=10° L=12 GL=49 S=8mm

Dovetail bit HW Z=2 D=14 A=10° L=12 GL=49 S=8mm

Specifically designed for cutting in hinges. stair treads and...

Specifically designed for cutting in hinges. stair treads and the general routing of larger flat bottom areas

Rounding over cutter R6,3 S=6mm

Rounding over cutter R6,3 S=6mm

This results in a particularly clean result with thin coatings...

This results in a particularly clean result with thin coatings and long-fiber funnels.

This results in a particularly clean result with thin coatings...

This results in a particularly clean result with thin coatings and long-fiber funnels.

Rounding over cutter with extended and tapering cutting edges....

Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.

Titman Staff / corner bead bit with bearing HW Z=2 D=20 L=12...

Titman Staff / corner bead bit with bearing HW Z=2 D=20 L=12 R=2 S=8

Rounding over cutter R5  S8mm

Rounding over cutter R5  S8mm

Rounding over cutter R6.3  S8mm

Rounding over cutter R6.3  S8mm

Replacement tip bearing guide cutter. For coated boards, solid...

Replacement tip bearing guide cutter. For coated boards, solid wood and wood-basedmaterials

Replacement tip rebate cutter with bearing 

Replacement tip rebate cutter with bearing 

Replacement tip rebate cutter with bearing 

Replacement tip rebate cutter with bearing