JVL pro-line chamfer bit...
JVL pro-line chamfer bit 25°x 22.2x13. 8mm shank
JVL pro-line chamfer bit 25°x 22.2x13. 8mm shank
Filtrer par
Disponibilité
Diamètre du trou
Diamètre extérieur
Diamètre de connexion
Diamètre (D)
Longueur de coupe - hauteur
Longueur totale
Rayon/angle
Coupeurs
Il y a 71 produits.
JVL pro-line chamfer bit 25°x 22.2x13. 8mm shank
JVL pro-line chamfer bit 25°x 22.2x13. 8mm shank
JVL pro-line roundnose bit D 19 mm
JVL pro-line roundnose bit D 19 mm
Convient à: Acier, Acier inoxydable et cuivre
Convient à: Acier, Acier inoxydable et cuivre
Convient à: Acier, Acier inoxydable et cuivre
Convient à: Acier, Acier inoxydable et cuivre
JVL pro-line Raised panel chamfer bit 25°
JVL pro-line Raised panel chamfer bit 25°
Convient à: Acier, Acier inoxydable, Fonte, Aluminium et cuivre
Convient à: Acier, Acier inoxydable, Fonte, Aluminium et cuivre
JVL Rounding over router bit R 6.35 mm with 8mm shank
JVL Rounding over router bit R 6.35 mm with 8mm shank
EPROCUT Flush trim bit HW Z=2 D=12,7 L=16 GL=48 S=8
EPROCUT Flush trim bit HW Z=2 D=12,7 L=16 GL=48 S=8
Single flute cutter with neck for plastic and aluminium
Single flute cutter with neck for plastic and aluminium
ENT Straight Cutter TC / Two Flutes with grinded bottom cut...
ENT Straight Cutter TC / Two Flutes with grinded bottom cut and 8 mm shank.
Double flute milling cutter for plastic and aluminium
Double flute milling cutter for plastic and aluminium
Straight bit shank 6 mm
Straight bit shank 6 mm
Dowel drill bit S10 mm Lefthand rot.
Dowel drill bit S10 mm Lefthand rot.
Through hole drill bit D3 L57 S10 mm Righthand rot.
Through hole drill bit D3 L57 S10 mm Righthand rot.
Straight bit shank 8mm
Straight bit shank 8mm
Straight bit shank 8mm
Straight bit shank 8mm
Straight bit shank 6 mm
Straight bit shank 6 mm
Straight bit shank 6 mm
Straight bit shank 6 mm
Straight bit shank 8mm
Straight bit shank 8mm
Dowel drill bit shank 8 mm cylindrical Lefthand
Dowel drill bit shank 8 mm cylindrical Lefthand
Dowel drill bit shank 8 mm cylindrical Righthand
Dowel drill bit shank 8 mm cylindrical Righthand
Straight bit shank 12 mm
Straight bit shank 12 mm
Straight bit shank 8mm
Straight bit shank 8mm
Straight bit shank 12 mm
Straight bit shank 12 mm
Dovetail bit HW D=13,5 A=13 degrees L=12,5 GL=44 S=8
Dovetail bit HW D=13,5 A=13 degrees L=12,5 GL=44 S=8
Face milling bit HW Z=2 D=20 L=13 GL=45 S=8
Face milling bit HW Z=2 D=20 L=13 GL=45 S=8
Straight bit shank 8mm
Straight bit shank 8mm