EPROCUT Flush trim bit HW...
EPROCUT Flush trim bit HW Z=2 D=12,7 L=16 GL=48 S=8
EPROCUT Flush trim bit HW Z=2 D=12,7 L=16 GL=48 S=8
- -10%
- -10%
Filtrer par
Disponibilité
Diamètre du trou
Diamètre extérieur
Diamètre de connexion
Diamètre (D)
Longueur de coupe - hauteur
Longueur totale
Rayon/angle
Coupeurs
Il y a 57 produits.
EPROCUT Flush trim bit HW Z=2 D=12,7 L=16 GL=48 S=8
EPROCUT Flush trim bit HW Z=2 D=12,7 L=16 GL=48 S=8
Single flute cutter with neck for plastic and aluminium
Single flute cutter with neck for plastic and aluminium
ENT Straight Cutter TC / Two Flutes with grinded bottom cut...
ENT Straight Cutter TC / Two Flutes with grinded bottom cut and 8 mm shank.
Double flute milling cutter for plastic and aluminium
Double flute milling cutter for plastic and aluminium
Straight bit shank 6 mm
Straight bit shank 6 mm
Dowel drill bit S10 mm Lefthand rot.
Dowel drill bit S10 mm Lefthand rot.
Through hole drill bit D3 L57 S10 mm Righthand rot.
Through hole drill bit D3 L57 S10 mm Righthand rot.
Straight bit shank 8mm
Straight bit shank 8mm
Straight bit shank 8mm
Straight bit shank 8mm
Straight bit shank 6 mm
Straight bit shank 6 mm
Straight bit shank 6 mm
Straight bit shank 6 mm
Straight bit shank 8mm
Straight bit shank 8mm
Dowel drill bit shank 8 mm cylindrical Lefthand
Dowel drill bit shank 8 mm cylindrical Lefthand
Dowel drill bit shank 8 mm cylindrical Righthand
Dowel drill bit shank 8 mm cylindrical Righthand
Straight bit shank 12 mm
Straight bit shank 12 mm
Straight bit shank 8mm
Straight bit shank 8mm
Straight bit shank 12 mm
Straight bit shank 12 mm
Straight bit shank 8mm
Straight bit shank 8mm
Straight bit shank 8mm
Straight bit shank 8mm
Dovetail bit HW Z=2 D=20 A=10 degrees L=16 GL=52 S=10
Dovetail bit HW Z=2 D=20 A=10 degrees L=16 GL=52 S=10
Dovetail bit HW Z=2 D=20 A=10° L=16 GL=52 S=8
Dovetail bit HW Z=2 D=20 A=10° L=16 GL=52 S=8
Trimmers with bearing
Trimmers with bearing
Coupe-guide de roulement pour couper les placages saillants et...
Coupe-guide de roulement pour couper les placages saillants et les bords en plastique. Il est également possible de copier à l'aide d'un modèle. Les petits diamètres sont idéaux pour le traitement des coins intérieurs.
Trimmers with bearing
Trimmers with bearing
Spiral cutter Z2 Positive - Upcut for Plastics Suitable for:...
Spiral cutter Z2 Positive - Upcut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)
Water channel cutter with bearing
Water channel cutter with bearing