Straight Cutter TC Z2 D12...
ENT Straight Cutter TC / Two Flutes with grinded bottom cut...
ENT Straight Cutter TC / Two Flutes with grinded bottom cut and 8 mm shank.
Filtrer par
Disponibilité
Diamètre du trou
Diamètre de connexion
Diamètre (D)
Longueur de coupe - hauteur
Longueur totale
Rayon/angle
Coupeurs
Il y a 57 produits.
Filtres actifs
ENT Straight Cutter TC / Two Flutes with grinded bottom cut...
ENT Straight Cutter TC / Two Flutes with grinded bottom cut and 8 mm shank.
Straight bit shank 12 mm
Straight bit shank 12 mm
Straight bit shank 12 mm
Straight bit shank 12 mm
Straight bit shank 12 mm
Straight bit shank 12 mm
Trimming Cutter TC with Shear Cutting Angle and 12 mm shank...
Trimming Cutter TC with Shear Cutting Angle and 12 mm shank ENT 13465
Bevel cutter with real center cutting edge for direct...
Bevel cutter with real center cutting edge for direct immersion in the material. For foldingand chamfering wood, laminate and plastic sheets.
Straight bit shank 12 mm
Straight bit shank 12 mm
Trimmers with bearing top and bottom
Trimmers with bearing top and bottom
Trimmers with bearing
Trimmers with bearing
Trimmers with bearing
Trimmers with bearing
Trimming cutter with bearing on shank for scanning overhead...
Trimming cutter with bearing on shank for scanning overhead templates. With centertip for immersion like a drill. Suitable for coated boards. solid woods and wood-basedmaterials.
Replacement tip Straight bit Z=1 Shank 12 mm
Replacement tip Straight bit Z=1 Shank 12 mm
Replacement tip Straight bit Z=1 Shank 12 mm
Replacement tip Straight bit Z=1 Shank 12 mm
Replacement tip bearing guide cutter. For coated boards, solid...
Replacement tip bearing guide cutter. For coated boards, solid wood and wood-basedmaterials
Replacement tip Straight bit Z=1 Shank 12 mm
Replacement tip Straight bit Z=1 Shank 12 mm
Replacement tip Straight bit Z=1 Shank M10x1.5
Replacement tip Straight bit Z=1 Shank M10x1.5
Replacement tip Straight bit Z=1 Shank M12x1
Replacement tip Straight bit Z=1 Shank M12x1
Replacement tip Straight bit Z=1 Shank 12 mm
Replacement tip Straight bit Z=1 Shank 12 mm
Replacement tip Straight bit Z=1 Shank 12 mm
Replacement tip Straight bit Z=1 Shank 12 mm
Replacement tip Straight bit Z=1 Shank 12 mm
Replacement tip Straight bit Z=1 Shank 12 mm
Bore 30mm. Cutterhead with HW reversible knives and spurs on...
Bore 30mm. Cutterhead with HW reversible knives and spurs on both sides rebating and edging. Suitable for solid soft wood. chipboard. veneered and laminated panels. plywood. etc.The shear angle allows a better chip removal and a longer cutting edge life.
Replacement tip Straight bit Z=1 Shank M10x1.5
Replacement tip Straight bit Z=1 Shank M10x1.5
Replacement tip Straight bit Z=1 Shank M12x1
Replacement tip Straight bit Z=1 Shank M12x1
Replacement tip Straight bit Z=1 Shank M10x1.5
Replacement tip Straight bit Z=1 Shank M10x1.5
Replacement tip Straight bit Z=1 Shank M12x1
Replacement tip Straight bit Z=1 Shank M12x1