JVL pro-line rounding over...
JVL pro-line rounding over bit 31.8mm
JVL pro-line rounding over bit 31.8mm
Filtrer par
Disponibilité
Diamètre de connexion
Diamètre (D)
Longueur de coupe - hauteur
Longueur totale
Rayon/angle
Coupeurs
Il y a 44 produits.
Filtres actifs
JVL pro-line rounding over bit 31.8mm
JVL pro-line rounding over bit 31.8mm
ENT Straight Cutter TC / One Flute with 8 mm shank
ENT Straight Cutter TC / One Flute with 8 mm shank
ENT Straight Cutter TC / One Flute with 8 mm shank
ENT Straight Cutter TC / One Flute with 8 mm shank
EPROCUT Flush trim bit HW Z=2 D=12,7 L=16 GL=48 S=8
EPROCUT Flush trim bit HW Z=2 D=12,7 L=16 GL=48 S=8
Straight bit shank 6 mm
Straight bit shank 6 mm
Coupe-guide de roulement pour couper les placages saillants et...
Coupe-guide de roulement pour couper les placages saillants et les bords en plastique. Il est également possible de copier à l'aide d'un modèle. Les petits diamètres sont idéaux pour le traitement des coins intérieurs.
Trimmers with bearing
Trimmers with bearing
For chamfering thin sheets, plywood, acrylic, etc. For...
For chamfering thin sheets, plywood, acrylic, etc. For interior and exterior contours.
Side slotting cutter Shank 12 mm
Side slotting cutter Shank 12 mm
Side slotting cutter Shank 8 mm
Side slotting cutter Shank 8 mm
Side slotting cutter Shank 12 mm
Side slotting cutter Shank 12 mm
Side slotting cutter Shank 8 mm
Side slotting cutter Shank 8 mm
Side slotting cutter Shank 12 mm
Side slotting cutter Shank 12 mm
Side slotting cutter Shank 12 mm
Side slotting cutter Shank 12 mm
Rounding over cutter with extended and tapering cutting edges....
Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.
Rounding over cutter with extended and tapering cutting edges....
Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.
Rounding over cutter with extended and tapering cutting edges....
Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.
Rounding over cutter with extended and tapering cutting edges....
Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.
Rounding over cutter with extended and tapering cutting edges....
Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.
Rounding over cutter with extended and tapering cutting edges....
Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.
Rounding over cutter R8 S8mm
Rounding over cutter R8 S8mm