Rounding over router bit R...
JVL Rounding over router bit R 4.8 mm with 8mm shank
JVL Rounding over router bit R 4.8 mm with 8mm shank
Filtrer par
Disponibilité
Diamètre de connexion
Rayon/angle
Les fraises à arrondir sont utilisées pour créer des courbes sur les bords.
Nous disposons de fraises à arrondir d'un rayon de 1 mm à 25 mm.
Fraises à double arrondi pour arrondir les deux côtés en une seule opération.
Il y a 45 produits.
Filtres actifs
JVL Rounding over router bit R 4.8 mm with 8mm shank
JVL Rounding over router bit R 4.8 mm with 8mm shank
JVL Rounding over router bit R 7.9 mm with 8mm shank
JVL Rounding over router bit R 7.9 mm with 8mm shank
JVL Rounding over router bit R 6.35 mm with 8mm shank
JVL Rounding over router bit R 6.35 mm with 8mm shank
EPROCUT Rounding over bit HW Z=2 D=16,7 R=2 L=8 GL=40 S=8
EPROCUT Rounding over bit HW Z=2 D=16,7 R=2 L=8 GL=40 S=8
Two flute rounding over cutter with an exchangeable bearing...
Two flute rounding over cutter with an exchangeable bearing with 12.7 mm. For precise and clean rounded edges.
EPROCUT Rounding over bit HW Z=2 D=31,7 R=9,5 L=16 GL=48 S=8
EPROCUT Rounding over bit HW Z=2 D=31,7 R=9,5 L=16 GL=48 S=8
Rounding over cutter with extended and tapering cutting edges....
Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.
Rounding over cutter with extended and tapering cutting edges....
Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.
Rounding over cutter with extended and tapering cutting edges....
Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.
Rounding over cutter with extended and tapering cutting edges....
Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.
Rounding over cutter with extended and tapering cutting edges....
Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.
Rounding over cutter with extended and tapering cutting edges....
Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.
Rounding over cutter with extended and tapering cutting edges....
Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.
Rounding over cutter with extended and tapering cutting edges....
Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.
Titman rounding cutter D=16,3 L=9 R=4 d=6,35 S=8
Titman rounding cutter D=16,3 L=9 R=4 d=6,35 S=8
Rounding over cutter with guide pin shank 8 mm
Rounding over cutter with guide pin shank 8 mm
Rounding over cutter with guide pin shank 8 mm
Rounding over cutter with guide pin shank 8 mm
Rounding over cutter R5 S8mm
Rounding over cutter R5 S8mm
Rounding over cutter R4 S8mm
Rounding over cutter R4 S8mm
Rounding over cutter R3 S=8mm
Rounding over cutter R3 S=8mm
Rounding over cutter with guide pin shank 8 mm
Rounding over cutter with guide pin shank 8 mm