Diamond router bits - PCD

  • Much longer tool life then hard-metal tools while processing abrasive materials.
  • Suitable for machining various materials including hardwood, glued-laminated wood, plastics, reinforced plastics, Trespa and Corian.

Note: PCD is fragile, always keep in packaging when not in use.

Shop by Category

Eco-Line Mini D10 S12mm PCD router cutter | Wirutex
  • -20%

Eco-line

Eco-Line Mini D10 S12mm PCD router cutter

Ref: S14461
For contouring, boring and sizing panels in chipboard and MDF, unpolished or faced.
Design

PCD tips
HM tungsten carbide plunging tip
Positive and negative shear angle
Sharpening area: 1.0 mm
Feed speed: up to 15 m/min
Max. rpm: 18,000 – 24,000
Minimum material thickness 13 mm
€65.00 -20% €52.00
Out of stock, please inquire about delivery time
PCD Diamond straight router bit 12mm L26 S12mm | JVL Tools
  • -20%
  • New

Eco-line

PCD Diamond straight router bit 10mm L26 S12mm

Ref: 900.10.26.12
PKD diamond groove cutter, bottom cutting. Suitable for processing wood, bonded panels (MDF, chipboard), Trespa, concrete plywood, plexiglass, melamine, and various types of (reinforced) plastics.
€72.52 -20% €58.02
Out of stock, please inquire about delivery time
PCD Diamond straight router bit 12mm L26 S12mm | JVL Tools
  • -20%

Eco-line

PCD Diamond straight router bit 12mm L26 S12mm

Ref: 900.12.26.12
PKD diamond groove cutter, bottom cutting. Suitable for processing wood, bonded panels (MDF, chipboard), Trespa, concrete plywood, plexiglass, melamine, and various types of (reinforced) plastics.
€72.52 -20% €58.02
4 in stock
PCD Diamond straight router bit 12mm L26 S8mm | JVL Tools

Eco-line

PCD Diamond straight router bit 12mm L26 S8mm

Ref: 900.12.26.08
PCD straight router bit bottom cutting
Suitable for milling wood. MDF. chipboard. plastics. veneer. melamine and hi-macs
€60.00
1 in stock
Eco-Line Mini D20 L27 S20mm PCD router cutter | Wirutex
  • -20%

Eco-line

Eco-Line Mini D20 L27 S20mm PCD router cutter

Ref: P03930
For contouring, boring and sizing panels in chipboard and MDF, unpolished or faced.
Design

PCD tips
HM tungsten carbide plunging tip
Positive and negative shear angle
Sharpening area: 1.0 mm
Feed speed: up to 15 m/min
Max. rpm: 18,000 – 24,000
Minimum material thickness 13 mm
€83.00 -20% €66.40
Out of stock, please inquire about delivery time
Eco-Line Mini D18 L27 S20mm PCD router cutter | Wirutex
  • -20%

Eco-line

Eco-Line Mini D18 L27 S20mm PCD router cutter

Ref: P03870
For contouring, boring and sizing panels in chipboard and MDF, unpolished or faced.
Design

PCD tips
HM tungsten carbide plunging tip
Positive and negative shear angle
Sharpening area: 1.0 mm
Feed speed: up to 15 m/min
Max. rpm: 18,000 – 24,000
Minimum material thickness 13 mm
€83.00 -20% €66.40
Out of stock, please inquire about delivery time
Eco-Line Mini D16 L27 S16mm PCD router cutter | Wirutex
  • -20%

Eco-line

Eco-Line Mini D16 L27 S16mm PCD router cutter

Ref: P03810
For contouring, boring and sizing panels in chipboard and MDF, unpolished or faced.
Design

PCD tips
HM tungsten carbide plunging tip
Positive and negative shear angle
Sharpening area: 1.0 mm
Feed speed: up to 15 m/min
Max. rpm: 18,000 – 24,000
Minimum material thickness 13 mm
€83.00 -20% €66.40
Out of stock, please inquire about delivery time
Eco-Line Mini D12 L27 S12mm PCD router cutter | Wirutex
  • -20%

Eco-line

Eco-Line Mini D12 L27 S12mm PCD router cutter

Ref: P03770
For contouring, boring and sizing panels in chipboard and MDF, unpolished or faced.
Design

PCD tips
HM tungsten carbide plunging tip
Positive and negative shear angle
Sharpening area: 1.0 mm
Feed speed: up to 15 m/min
Max. rpm: 18,000 – 24,000
Minimum material thickness 13 mm
€83.00 -20% €66.40
Out of stock, please inquire about delivery time
PCD Diamond straight router bit 16mm L35 S16mm | JVL Tools

Eco-line

PCD Diamond straight router bit 16mm L35 S16mm

Ref: 900.16.35.16
PCD Diamond straight router bit bottom cutting
Suitable for milling wood. MDF. chipboard. plastics. veneer. melamine and hi-macs
€70.00
2 in stock
PCD Diamond straight router bit D16 B26 S16mm | JVL Tools

Eco-line

PCD Diamond straight router bit D16 B26 S16mm

Ref: 900.16.26.16
PCD Diamond straight router bit bottom cutting
Suitable for milling wood. MDF. chipboard. plastics. veneer. melamine and hi-macs
€70.00
8 in stock
PCD Diamond straight router bit 12mm L26 S12mm | JVL Tools
  • -20%
  • New

Eco-line

PCD Diamond straight router bit 10mm L35 S12mm

Ref: 900.10.35.12
PKD diamond groove cutter, bottom cutting. Suitable for processing wood, bonded panels (MDF, chipboard), Trespa, concrete plywood, plexiglass, melamine, and various types of (reinforced) plastics.
€96.68 -20% €77.34
Out of stock, please inquire about delivery time
PCD Diamond straight router bit 12mm L35 S12mm | JVL Tools
  • -20%

Eco-line

PCD Diamond straight router bit 12mm L35 S12mm

Ref: 900.12.35.12
PKD diamond groove cutter, bottom cutting. Suitable for processing wood, bonded panels (MDF, chipboard), Trespa, concrete plywood, plexiglass, melamine, and various types of (reinforced) plastics.
€96.68 -20% €77.34
2 in stock
Eco-Line Mini D20 L35 S20mm PCD router cutter | Wirutex
  • -20%

Eco-line

Eco-Line Mini D20 L35 S20mm PCD router cutter

Ref: P03950
For contouring, boring and sizing panels in chipboard and MDF, unpolished or faced.
Design

PCD tips
HM tungsten carbide plunging tip
Positive and negative shear angle
Sharpening area: 1.0 mm
Feed speed: up to 15 m/min
Max. rpm: 18,000 – 24,000
Minimum material thickness 13 mm
€110.00 -20% €88.00
Out of stock, please inquire about delivery time
Eco-Line Mini D18 L35 S20mm PCD router cutter | Wirutex
  • -20%

Eco-line

Eco-Line Mini D18 L35 S20mm PCD router cutter

Ref: P03890
For contouring, boring and sizing panels in chipboard and MDF, unpolished or faced.
Design

PCD tips
HM tungsten carbide plunging tip
Positive and negative shear angle
Sharpening area: 1.0 mm
Feed speed: up to 15 m/min
Max. rpm: 18,000 – 24,000
Minimum material thickness 13 mm
€110.00 -20% €88.00
Out of stock, please inquire about delivery time
Eco-Line Mini D16 L35 S16mm PCD router cutter | Wirutex
  • -20%

Eco-line

Eco-Line Mini D16 L35 S16mm PCD router cutter

Ref: P03830
For contouring, boring and sizing panels in chipboard and MDF, unpolished or faced.
Design

PCD tips
HM tungsten carbide plunging tip
Positive and negative shear angle
Sharpening area: 1.0 mm
Feed speed: up to 15 m/min
Max. rpm: 18,000 – 24,000
Minimum material thickness 13 mm
€110.00 -20% €88.00
Out of stock, please inquire about delivery time
Eco-Line Mini D12 L35 S12mm PCD router cutter | Wirutex
  • -20%

Eco-line

Eco-Line Mini D12 L35 S12mm PCD router cutter

Ref: P03790
For contouring, boring and sizing panels in chipboard and MDF, unpolished or faced.
Design

PCD tips
HM tungsten carbide plunging tip
Positive and negative shear angle
Sharpening area: 1.0 mm
Feed speed: up to 15 m/min
Max. rpm: 18,000 – 24,000
Minimum material thickness 13 mm
€110.00 -20% €88.00
Out of stock, please inquire about delivery time
PCD Diamond straight router bit 20mm L35 S20mm | JVL Tools

Eco-line

PCD Diamond straight router bit 20mm L35 S20mm

Ref: 900.20.35.20
PCD straight router bit bottom cutting.
Suitable for milling wood. MDF. chipboard. plastics. veneer. melamine and hi-macs
€90.00
1 in stock
PCD Diamond straight router bit 18mm L35 S20mm | JVL Tools

Eco-line

PCD Diamond straight router bit 18mm L35 S20mm

Ref: 900.18.35.20
PCD Diamond straight router bit bottom cutting
Suitable for milling wood. MDF. chipboard. plastics. veneer. melamine and hi-macs
€90.00
2 in stock