Prices drop

Active filters

  • Cutting length/height::16mm clear
  • Cutting length/height::27mm clear
  • Cutting length/height::66 - 96 mm clear
  • Cutting length/height::L1(8mm) L2(26mm) clear
  • Cutting length/height::L1(15mm) L2(20mm) clear
  • Cutting length/height::L1(18) L2(35) clear
Adjustable jointing cutterhead (type 1) Bore 30mm | Stark
  • -21%

lock miter / jointing cutter heads

Adjustable jointing cutterhead (type 1) Bore 30mm

Ref: SH95TM43030
Steel body, standard tungsten carbide profiled knives for high precision jointing in hardwood andsoftwood, suitable for end grain and corner joints (windows), for wood thicknesses 38-94 mm, suitablefor both manual and mechanical feed.
Out of stock, please inquire about delivery time
€763.10 -21% €602.85 
Adjustable jointing cutterhead (type 1) Bore 31,75mm ( 1-1/4 inch ) | Stark
  • -21%

lock miter / jointing cutter heads

Adjustable jointing cutterhead (type 1) Bore 31,75mm ( 1-1/4 inch )

Ref: SH95TM43031
Steel body, standard tungsten carbide profiled knives for high precision jointing in hardwood andsoftwood, suitable for end grain and corner joints (windows), for wood thicknesses 38-94 mm, suitablefor both manual and mechanical feed.
Out of stock, please inquire about delivery time
€784.30 -21% €619.60 
Adjustable jointing cutterhead (type 1) Bore 35mm | Stark
  • -21%

lock miter / jointing cutter heads

Adjustable jointing cutterhead (type 1) Bore 35mm

Ref: SH95TM43035
Steel body, standard tungsten carbide profiled knives for high precision jointing in hardwood andsoftwood, suitable for end grain and corner joints (windows), for wood thicknesses 38-94 mm, suitablefor both manual and mechanical feed.
Out of stock, please inquire about delivery time
€784.30 -21% €619.60 
Adjustable jointing cutterhead (type 1) Bore 40mm | Stark
  • -21%

lock miter / jointing cutter heads

Adjustable jointing cutterhead (type 1) Bore 40mm

Ref: SH95TM43040
Steel body, standard tungsten carbide profiled knives for high precision jointing in hardwood andsoftwood, suitable for end grain and corner joints (windows), for wood thicknesses 38-94 mm, suitablefor both manual and mechanical feed.
Out of stock, please inquire about delivery time
€784.30 -21% €619.60 
Adjustable jointing cutterhead bore 30mm (type 2) | Stark
  • -21%

lock miter / jointing cutter heads

Adjustable jointing cutterhead bore 30mm (type 2)

Ref: SH95TM42030
Steel body. standard tungsten carbide profiled knives for high precision jointing in hardwood andsoftwood. suitable for end grain and corner joints (windows). for wood thicknesses 38-94 mm. suitablefor both manual and mechanical feed.
Out of stock, please inquire about delivery time
€763.10 -21% €602.85 
Adjustable jointing cutterhead bore 31,75mm (1-1/4 inch) (type 2) | Stark
  • -21%

lock miter / jointing cutter heads

Adjustable jointing cutterhead bore 31,75mm (1-1/4 inch) (type 2)

Ref: SH95TM42031
Steel body. standard tungsten carbide profiled knives for high precision jointing in hardwood andsoftwood. suitable for end grain and corner joints (windows). for wood thicknesses 38-94 mm. suitablefor both manual and mechanical feed.
Out of stock, please inquire about delivery time
€784.30 -21% €619.60 
Adjustable jointing cutterhead bore 35mm (type 2) | Stark
  • -21%

lock miter / jointing cutter heads

Adjustable jointing cutterhead bore 35mm (type 2)

Ref: SH95TM42035
Steel body. standard tungsten carbide profiled knives for high precision jointing in hardwood andsoftwood. suitable for end grain and corner joints (windows). for wood thicknesses 38-94 mm. suitablefor both manual and mechanical feed.
Out of stock, please inquire about delivery time
€784.30 -21% €619.60 
Adjustable jointing cutterhead bore 40mm (type 2) | Stark
  • -21%

lock miter / jointing cutter heads

Adjustable jointing cutterhead bore 40mm (type 2)

Ref: SH95TM42040
Steel body. standard tungsten carbide profiled knives for high precision jointing in hardwood andsoftwood. suitable for end grain and corner joints (windows). for wood thicknesses 38-94 mm. suitablefor both manual and mechanical feed.
Out of stock, please inquire about delivery time
€784.30 -21% €619.60 
Bevel cutter 45° S8mm | Titman Tools
  • -15%

Chamfering bits

Bevel cutter 45° S8mm

Ref: RPC45-8
Bevel cutter S=8 with high diameter
D=36 A=45° L1=12 L2=16 GL=47 S=8
in stock
€87.00 -15% €73.95 
Bevel cutter with center tip 30° S8mm | Titman Tools
  • -15%

Chamfering bits

Bevel cutter with center tip 30° S8mm

Ref: BCF30-8
Bevel cutter with real center cutting edge for direct immersion in the material. For foldingand chamfering wood, laminate and plastic sheets.
Out of stock, please inquire about delivery time
€78.00 -15% €66.30 
Cove mould cutter for solid surface | Titman Tools
  • -15%

For corian / HIMACS

Cove mould cutter for solid surface

Ref: XC701-12
Cove mould cutter for solid surface
Out of stock, please inquire about delivery time
€88.00 -15% €74.80 
Dovetail bit 10° HW Z2 D20 S8mm | Titman Tools
  • -15%

Dovetail bits

Dovetail bit 10° HW Z2 D20 S8mm

Ref: DC20-8
Dovetail bit HW Z=2 D=20 A=10° L=16 GL=52 S=8
in stock
€50.25 -15% €42.72 
Eco-Line Mini D10 S12mm PCD router cutter | Wirutex
  • -20%

Eco-line

Eco-Line Mini D10 S12mm PCD router cutter

Ref: S14461
For contouring, boring and sizing panels in chipboard and MDF, unpolished or faced.
Design

PCD tips
HM tungsten carbide plunging tip
Positive and negative shear angle
Sharpening area: 1.0 mm
Feed speed: up to 15 m/min
Max. rpm: 18,000 – 24,000
Minimum material thickness 13 mm
Out of stock, please inquire about delivery time
€65.00 -20% €52.00 
Eco-Line Mini D12 L27 S12mm PCD router cutter | Wirutex
  • -20%

Eco-line

Eco-Line Mini D12 L27 S12mm PCD router cutter

Ref: P03770
For contouring, boring and sizing panels in chipboard and MDF, unpolished or faced.
Design

PCD tips
HM tungsten carbide plunging tip
Positive and negative shear angle
Sharpening area: 1.0 mm
Feed speed: up to 15 m/min
Max. rpm: 18,000 – 24,000
Minimum material thickness 13 mm
Out of stock, please inquire about delivery time
€83.00 -20% €66.40 
Eco-Line Mini D16 L27 S16mm PCD router cutter | Wirutex
  • -20%

Eco-line

Eco-Line Mini D16 L27 S16mm PCD router cutter

Ref: P03810
For contouring, boring and sizing panels in chipboard and MDF, unpolished or faced.
Design

PCD tips
HM tungsten carbide plunging tip
Positive and negative shear angle
Sharpening area: 1.0 mm
Feed speed: up to 15 m/min
Max. rpm: 18,000 – 24,000
Minimum material thickness 13 mm
Out of stock, please inquire about delivery time
€83.00 -20% €66.40 
Eco-Line Mini D18 L27 S20mm PCD router cutter | Wirutex
  • -20%

Eco-line

Eco-Line Mini D18 L27 S20mm PCD router cutter

Ref: P03870
For contouring, boring and sizing panels in chipboard and MDF, unpolished or faced.
Design

PCD tips
HM tungsten carbide plunging tip
Positive and negative shear angle
Sharpening area: 1.0 mm
Feed speed: up to 15 m/min
Max. rpm: 18,000 – 24,000
Minimum material thickness 13 mm
Out of stock, please inquire about delivery time
€83.00 -20% €66.40 
Eco-Line Mini D20 L27 S20mm PCD router cutter | Wirutex
  • -20%

Eco-line

Eco-Line Mini D20 L27 S20mm PCD router cutter

Ref: P03930
For contouring, boring and sizing panels in chipboard and MDF, unpolished or faced.
Design

PCD tips
HM tungsten carbide plunging tip
Positive and negative shear angle
Sharpening area: 1.0 mm
Feed speed: up to 15 m/min
Max. rpm: 18,000 – 24,000
Minimum material thickness 13 mm
Out of stock, please inquire about delivery time
€83.00 -20% €66.40 
Guttering cutter R3 S6mm | Titman Tools
  • -15%

Cove bit

Guttering cutter R3 S6mm

Ref: HRC3-6
Guttering cutter
Out of stock, please inquire about delivery time
€47.00 -15% €39.95 
Guttering cutter R3 S8mm | Titman Tools
  • -15%

Cove bit

Guttering cutter R3 S8mm

Ref: HRC3-8
Guttering cutter
Out of stock, please inquire about delivery time
€47.00 -15% €39.95 
PCD router cutter D10 L27 S10mm Eco-Line Mini Z1+1 with HWM body | Wirutex
  • -20%

Eco-line

PCD router cutter D10 L27 S10mm Eco-Line Mini Z1+1 with HWM body

Ref: ES0211
For contouring, boring and sizing panels in chipboard and MDF, unpolished or faced.
PCD router cutters with HWM body which provides greater resistance to vibrations and makes them less prone to breakage than the Eco-line Mini Z1+1.
Design

PCD tips
Cutting edge head in HWM
Positive and negative shear angle
Sharpening area: 1.0 mm
Feed speed: up to 20 m/min
Max. rpm: 18,000 – 24,000
Minimum material thickness 13 mm
Out of stock, please inquire about delivery time
€250.00 -20% €200.00