Promotions

Filtres actifs

  • Longueur de coupe - hauteur :12 mm clear
  • Longueur de coupe - hauteur :L1(3mm) L2(12mm) clear
  • Longueur de coupe - hauteur :L1(14mm) L2(22mm) clear
  • Longueur de coupe - hauteur :L1(35mm) L2(44mm) clear
  • Longueur de coupe - hauteur :L1(35mm) L2(44mm) clear
  • Longueur de coupe - hauteur :L1(35mm) L2(44mm) clear
Rounding over cutter with extended cutting edge R4 S8mm | Titman Tools
  • -15%

Fraises à rayon concave

Rounding over cutter with extended cutting edge R4 S8mm

Ref: SROCB4/127-8
Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.
En rupture de stock, veuillez vous renseigner sur le délai de livraison
71,32 € -15% 60,62 € 
Spiral cutter for aluminium Z1 D3 L12 S3mm | Titman Tools
  • -15%

Pour aluminium, ALUCOBOND, DiBOND, REYNOBOND

Spiral cutter for aluminium Z1 D3 L12 S3mm

Ref: AL312-1Z
Solid carbide milling cutter with rounded chip chamber and mirror grinding.Optimized cutting geometry for processing all non-ferrous metals.
En rupture de stock, veuillez vous renseigner sur le délai de livraison
38,00 € -15% 32,30 € 
Spiral cutter for aluminium Z2 D3 L12 S3mm | Titman Tools
  • -15%

Pour aluminium, ALUCOBOND, DiBOND, REYNOBOND

Spiral cutter for aluminium Z2 D3 L12 S3mm

Ref: AL312-2Z
Solid carbide milling cutter with rounded chip chamber and mirror grinding.Optimized cutting geometry for processing all non-ferrous metals.
En rupture de stock, veuillez vous renseigner sur le délai de livraison
40,00 € -15% 34,00 € 
Spiral cutter Negative for Plastics D3 L12 S6mm | Titman Tools
  • -15%

Fraises hélicoïdales Z2

Spiral cutter Negative for Plastics D3 L12 S6mm

Ref: AC3DC-6
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
1 en stock
25,00 € -15% 21,25 € 
Spiral cutter Positiv for Plastics D3 L12 S1/4 inch | Titman Tools
  • -15%

Fraises hélicoïdales Z2

Spiral cutter Positiv for Plastics D3 L12 S1/4 inch

Ref: AC3-1/4
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
1 en stock
12,00 € -15% 10,20 € 
Spiral cutter Z1 Negative - Down cut D3 L12 S3 mm | Titman Tools
  • -15%

Fraisage en spirale Z1

Spiral cutter Z1 Negative - Down cut D3 L12 S3 mm

Ref: PK312-1RN
Spiral cutter Z1 Negative - Down cut for Plastics
Suitable for:

Acrylonitrile butadiene styrene (ABS)
Polycarbonate
Polyethylene
Polypropylene
Polystyrene
Polyvinyl chloride (PVC)
Polymethyl methacrylate (Acrylic. Plexi etc.)
En rupture de stock, veuillez vous renseigner sur le délai de livraison
34,00 € -15% 28,90 € 
Spiral cutter Z1 Negative - Down cut D5 L12 S5 mm | Titman Tools
  • -15%

Fraisage en spirale Z1

Spiral cutter Z1 Negative - Down cut D5 L12 S5 mm

Ref: PK512-1RN
Spiral cutter Z1 Negative - Down cut for Plastics
Suitable for:

Acrylonitrile butadiene styrene (ABS)
Polycarbonate
Polyethylene
Polypropylene
Polystyrene
Polyvinyl chloride (PVC)
Polymethyl methacrylate (Acrylic. Plexi etc.)
En rupture de stock, veuillez vous renseigner sur le délai de livraison
47,00 € -15% 39,95 € 
Spiral cutter Z1 Positive - Upcut D3 L12 S3mm | Titman Tools
  • -15%

Fraisage en spirale Z1

Spiral cutter Z1 Positive - Upcut D3 L12 S3mm

Ref: PK312-1RP
Spiral cutter Z1 Positive - Upcut for Plastics
Suitable for:

Acrylonitrile butadiene styrene (ABS)
Polycarbonate
Polyethylene
Polypropylene
Polystyrene
Polyvinyl chloride (PVC)
Polymethyl methacrylate (Acrylic. Plexi etc.)
En rupture de stock, veuillez vous renseigner sur le délai de livraison
34,00 € -15% 28,90 € 
Spiral cutter Z1 Positive - Upcut D5 L12 S5 mm | Titman Tools
  • -15%

Fraisage en spirale Z1

Spiral cutter Z1 Positive - Upcut D5 L12 S5 mm

Ref: PK512-1RP
Spiral cutter Z1 Positive - Upcut for Plastics
Suitable for:

Acrylonitrile butadiene styrene (ABS)
Polycarbonate
Polyethylene
Polypropylene
Polystyrene
Polyvinyl chloride (PVC)
Polymethyl methacrylate (Acrylic. Plexi etc.)
En rupture de stock, veuillez vous renseigner sur le délai de livraison
47,00 € -15% 39,95 € 
Spiral cutter Z2 Positive - Upcut 3mm S3mm | Titman Tools
  • -15%

Fraises hélicoïdales Z2

Spiral cutter Z2 Positive - Upcut 3mm S3mm

Ref: PK312-2RP
Spiral cutter Z2 Positive - Upcut for Plastics
Suitable for:

Acrylonitrile butadiene styrene (ABS)
Polycarbonate
Polyethylene
Polypropylene
Polystyrene
Polyvinyl chloride (PVC)
Polymethyl methacrylate (Acrylic. Plexi etc.)
2 en stock
34,50 € -15% 29,33 € 
Spiral cutter Z4 Positive - Upcut 3mm S3mm | Titman Tools
  • -15%

Fraisage en spirale Z3 ou plus

Spiral cutter Z4 Positive - Upcut 3mm S3mm

Ref: PK312-4RP
Spiral cutter Z2 Positive - Upcut for Plastics
Suitable for:

Acrylonitrile butadiene styrene (ABS)
Polycarbonate
Polyethylene
Polypropylene
Polystyrene
Polyvinyl chloride (PVC)
Polymethyl methacrylate (Acrylic. Plexi etc.)
En rupture de stock, veuillez vous renseigner sur le délai de livraison
47,00 € -15% 39,95 € 
Spiral finishing cutter D3 S3mm downcut Z2 | Titman Tools
  • -15%

Fraises hélicoïdales

Spiral finishing cutter D3 S3mm downcut Z2

Ref: SCF312-2RN
Spiral finishing cutter downcut Z2
En rupture de stock, veuillez vous renseigner sur le délai de livraison
32,00 € -15% 27,20 € 
Spiral finishing cutter D3 S3mm upcut Z2 | Titman Tools
  • -15%

Fraises hélicoïdales

Spiral finishing cutter D3 S3mm upcut Z2

Ref: SCF312-2RP
Spiral finishing cutter upcut Z2
En rupture de stock, veuillez vous renseigner sur le délai de livraison
30,00 € -15% 25,50 € 
Spiral finishing cutter D4 S4mm downcut Z2 | Titman Tools
  • -15%

Fraises hélicoïdales

Spiral finishing cutter D4 S4mm downcut Z2

Ref: SCF412-2RN
Spiral finishing cutter downcut Z2
En rupture de stock, veuillez vous renseigner sur le délai de livraison
38,00 € -15% 32,30 € 
Spiral finishing cutter D4 S4mm upcut Z2 | Titman Tools
  • -15%

Fraises hélicoïdales

Spiral finishing cutter D4 S4mm upcut Z2

Ref: SCF412-2RP
Spiral finishing cutter upcut Z2
En rupture de stock, veuillez vous renseigner sur le délai de livraison
35,00 € -15% 29,75 € 
Straight Cutter HM Z2 D5 S8mm | ENT
  • -20%

Fraises à rainure droite

Straight Cutter HM Z2 D5 S8mm

Ref: ENT-10356
ENT Straight Cutter TC / Two Flutes with grinded bottom cut and 8 mm shank.
2 en stock
18,90 € -20% 15,12 € 
Titman Straight cutter for Plastics D3 L12 S3mm | Titman Tools
  • -15%

Fraises à bords droits pour canaux

Titman Straight cutter for Plastics D3 L12 S3mm

Ref: AS312-1R
Straight cutter for Plastics
Suitable for:

Acrylonitrile butadiene styrene (ABS)
Polycarbonate
Polyethylene
Polypropylene
Polystyrene
Polyvinyl chloride (PVC)
Polymethyl methacrylate (Acrylic, Plexi etc.)
En rupture de stock, veuillez vous renseigner sur le délai de livraison
33,00 € -15% 28,05 € 
Trimmer D18 S8mm negative axis angle | Titman Tools
  • -15%

Fraises à arêtes de coupe axiales

Trimmer D18 S8mm negative axis angle

Ref: BGT90S-8
This results in a particularly clean result with thin coatings and long-fiber funnels.
En rupture de stock, veuillez vous renseigner sur le délai de livraison
49,00 € -15% 41,65 € 
Trimmer D18 S6mm negative axis angle | Titman Tools
  • -15%

Fraises à arêtes de coupe axiales

Trimmer D18 S6mm negative axis angle

Ref: BGT90S-6
This results in a particularly clean result with thin coatings and long-fiber funnels.
En rupture de stock, veuillez vous renseigner sur le délai de livraison
49,00 € -15% 41,65 € 
Trimmer D19 mm L 12 mm S6 mm | Titman Tools
  • -15%

Fraises à arêtes de coupe axiales

Trimmer D19 mm L 12 mm S6 mm

Ref: BGT90-6RT
Bearing guide cutter for trimming protruding veneer and plastic edges.
1 en stock
124,17 € -15% 105,54 € 
Wirutex Fraise à rainurer diamantée Z1 D6 tige 6 mm
  • -20%

Fraises à bords droits pour canaux

Wirutex Fraise à rainurer diamantée Z1 D6 tige 6 mm

Ref: S14463
Diamètre 6 mm, tige 6 mm
Convient aux centres d'usinage CNC.
Pour assemblages à entures multiples et feuillures.
Usinage sur panneaux de particules et MDF avec ou sans revêtement mélaminé, Corian, HPL et matériaux multicouches.
Pointe diamantée PCD.
Corps de fraise en carbure de tungstène massif.
Surface de rectification : 3,0 mm
Vitesse d'avance : 5 à 10 m/min
Vitesse max.: 18 000 - 24 000
1 en stock
148,00 € -20% 118,40 €