Promotions

Filtres actifs

  • Diamètre du trou :8mm clear
  • Diamètre du trou :40 mm clear
Adjustable groove cutterhead TYPE A - 160 x 8-15mm Bore 40mm | Stark
  • -5%

Porte-outils à rainurer

Adjustable groove cutterhead TYPE A - 160 x 8-15mm Bore 40mm

Ref: TH09TM01040
Cutterhead with steel body, tungsten carbide standard reversible knives and spurs, adjustable with 1/10 mm spacing rings (included) for high precision groove cutting,
En rupture de stock, veuillez vous renseigner sur le délai de livraison
244,90 € -5% 232,66 € 
Adjustable grooving 160 x 4-7.5 Bore 40mm | Stark
  • -5%

Porte-outils à rainurer

Adjustable grooving 160 x 4-7.5 Bore 40mm

Ref: IR20TM01040
Stark Adjustable grooving 160 x 4-7,5 Z=4 V=4
En rupture de stock, veuillez vous renseigner sur le délai de livraison
253,40 € -5% 240,73 € 
Adjustable grooving cutter Bore 40mm TYPE A + B - 180 x 4-15 mm Z8+2 V4 | Stark
  • -5%

Porte-outils à rainurer

Adjustable grooving cutter Bore 40mm TYPE A + B - 180 x 4-15 mm Z8+2 V4

Ref: TH23TM40040
Cutterhead with HW reversible knives and spurs for making thin precision grooves , adjustable by means of spacing rings.  Spacing rings are included.
En rupture de stock, veuillez vous renseigner sur le délai de livraison
512,70 € -5% 487,07 € 
Adjustable grooving cutter bore 40mm TYPE A - 180X4-7.5 Z8 V4 | Stark
  • -5%

Porte-outils à rainurer

Adjustable grooving cutter bore 40mm TYPE A - 180X4-7.5 Z8 V4

Ref: TH23TM05040
Cutterhead with HW reversible knives and spurs for making thin precision grooves , adjustable by means of spacing rings.

Spacing rings are included.
En rupture de stock, veuillez vous renseigner sur le délai de livraison
320,50 € -5% 304,48 € 
Adjustable grooving cutterhead 28 - 55 mm Bore 40mm | Stark
  • -5%

Porte-outils à rainurer

Adjustable grooving cutterhead 28 - 55 mm Bore 40mm

Ref: TH94TM10040
Cutterhead with HW reversible knives and spurs for making precision grooves.
En rupture de stock, veuillez vous renseigner sur le délai de livraison
362,90 € -5% 344,76 € 
adjustable grooving TYPE A - 160x 12.4 -24 mm Bore 40mm | Stark
  • -5%

Porte-outils à rainurer

adjustable grooving TYPE A - 160x 12.4 -24 mm Bore 40mm

Ref: TH09TM11040
Cutterhead with steel body. tungsten carbide standard reversible knives and spurs. adjustable with 1/10 mm spacing rings (included) for high precision groove cutting. chip thickness limitation and reduced recoil. suitable for manual and mechanical feed.
En rupture de stock, veuillez vous renseigner sur le délai de livraison
255,60 € -5% 242,82 € 
Adjustable jointing cutterhead bore 40mm (type 2) | Stark
  • -5%

Têtes de coupe à jointoyer

Adjustable jointing cutterhead bore 40mm (type 2)

Ref: SH95TM42040
Steel body. standard tungsten carbide profiled knives for high precision jointing in hardwood andsoftwood. suitable for end grain and corner joints (windows). for wood thicknesses 38-94 mm. suitablefor both manual and mechanical feed.
En rupture de stock, veuillez vous renseigner sur le délai de livraison
784,30 € -5% 745,08 € 
Along grain joint cutter 125X50 Z2 Bore 40mm | Stark
  • -5%

Têtes de coupe à jointoyer

Along grain joint cutter 125X50 Z2 Bore 40mm

Ref: YH152AAM040
Stark along grain joint cutter 125X50 Z=2 YH152AAM
En rupture de stock, veuillez vous renseigner sur le délai de livraison
210,80 € -5% 200,26 € 
Brazed Adjustable grooving 140 x 2,5 - 4,8 Bore 40mm | Stark
  • -5%

Porte-outils à rainurer

Brazed Adjustable grooving 140 x 2,5 - 4,8 Bore 40mm

Ref: IR10TM02040
HW brazed cutter with spurs for making precision grooves with various thickness.The tool is complete with spacing rings.
En rupture de stock, veuillez vous renseigner sur le délai de livraison
250,00 € -5% 237,50 € 
Concave and convex quarter rounds (R4-6-8 included) Bore 40mm | Stark
  • -5%

Têtes de coupe quart de rond

Concave and convex quarter rounds (R4-6-8 included) Bore 40mm

Ref: YS105BZM040
This set was designed to produce a variety of concave and convex rounds.It consists of a light alloy
cutterhead with two R 4 mm knives mounted on the tool and four spare R 6 and R 8 mm knives.
En rupture de stock, veuillez vous renseigner sur le délai de livraison
280,00 € -5% 266,00 € 
Cross grain joint cutter 125X60 Z3 Bore 40mm | Stark
  • -5%

Têtes de coupe à jointoyer

Cross grain joint cutter 125X60 Z3 Bore 40mm

Ref: YH156AAM040
Stark cross grain joint cutter 125X60 Z=3 YH156AAM
En rupture de stock, veuillez vous renseigner sur le délai de livraison
249,30 € -5% 236,84 € 
CUTTERHEAD FOR 45 degrees BEVELS 150mm Bore 40mm | Stark
  • -5%

Tête de coupe pour biseaux

CUTTERHEAD FOR 45 degrees BEVELS 150mm Bore 40mm

Ref: YH131AAM040
Body in light alloy execution. standard tungsten carbide reversible knives. precise 45 degrees bevel cuts on solid
wood and all types of board material. chip thickness limitation and reduced recoil. suitable for manual feed.
En rupture de stock, veuillez vous renseigner sur le délai de livraison
180,00 € -5% 171,00 € 
Cutterhead for door frames with HW knives Bore 40 mm | Stark
  • -5%

Têtes de coupe pour cadres de fenêtres et de portes

Cutterhead for door frames with HW knives Bore 40 mm

Ref: SH17TM50040
Cutterhead for door frames with HW knives
En rupture de stock, veuillez vous renseigner sur le délai de livraison
746,40 € -5% 709,08 € 
Cutterhead variable angle 160mm Bore 40mm | Stark
  • -5%

Tête de coupe pour biseaux

Cutterhead variable angle 160mm Bore 40mm

Ref: TH17TM20040
Stark cutterhead variable angle 160mm
En rupture de stock, veuillez vous renseigner sur le délai de livraison
425,00 € -5% 403,75 € 
Cutterheads Bore 40mm for windows hardware fittings Type 2 | Stark
  • -5%

Têtes de coupe pour cadres de fenêtres et de portes

Cutterheads Bore 40mm for windows hardware fittings Type 2

Ref: SH04TM05040
Steel body. standard tungsten carbide profiled knives for milling hardwood and softwood. chip thicknesslimitation and reduced recoil. suitable for both manual and mechanical feed.
En rupture de stock, veuillez vous renseigner sur le délai de livraison
421,00 € -5% 399,95 € 
ENT slotting cutter 2 mm | ENT
  • -20%

Coupe-disques

ENT slotting cutter 2 mm

Ref: ENT-13940
ENT slotting cutter 2mm for 8mm arbor. With 4 HM cutters. Cutting height 2 mm . Diameter 50.8 mm
1 en stock
37,00 € -20% 29,60 € 
ENT slotting cutter 2.5 mm | ENT
  • -20%

Coupe-disques

ENT slotting cutter 2.5 mm

Ref: ENT-13941
ENT slotting cutter 4mm for 8mm arbor. With 4 HM cutters. Cutting height 2.5 mm . Diameter 50.8 mm
1 en stock
34,00 € -20% 27,20 € 
ENT slotting cutter 5 mm | ENT
  • -20%

Coupe-disques

ENT slotting cutter 5 mm

Ref: ENT-13944
ENT slotting cutter 4mm for 8mm arbor. With 4 HM cutters. Cutting height 5 mm . Diameter 50.8 mm
1 en stock
37,00 € -20% 29,60 € 
ENT slotting cutter 6 mm | ENT
  • -20%

Coupe-disques

ENT slotting cutter 6 mm

Ref: ENT-13945
ENT slotting cutter 4mm for 8mm arbor. With 4 HM cutters. Cutting height 6 mm . Diameter 50.8 mm
1 en stock
37,00 € -20% 29,60 € 
Grooving cutter bore 40mm TYPE B - 180 x 7.65 Z2 | Stark
  • -5%

Porte-outils à rainurer

Grooving cutter bore 40mm TYPE B - 180 x 7.65 Z2

Ref: TH23TM10040
Cutterhead with HW reversible knives and spurs for making thin precision grooves. The central element (type B) fits two standard disposable knives of 7,65x12x1,5 mm. 

can be combined with Type A milling head with the same diameter and bore.
En rupture de stock, veuillez vous renseigner sur le délai de livraison
213,60 € -5% 202,92 €