Promotions

Filtres actifs

  • Diamètre du trou :8mm clear
  • Diamètre du trou :30 mm clear
Adjustable Grooving set TYPE A + B - 160 x 8-28 mm Bore 30mm | Stark
  • -5%

Porte-outils à rainurer

Adjustable Grooving set TYPE A + B - 160 x 8-28 mm Bore 30mm

Ref: TH09TM20030
Bore 30mm
Cutterhead with steel body. tungsten carbide standard reversible knives and spurs. adjustable with 1/10mm spacing rings (included) for high precision groove cutting. chip thickness limitation and reducedrecoil. suitable for manual and mechanical feed.
Grooves 8 to 28 mm
En rupture de stock, veuillez vous renseigner sur le délai de livraison
402,60 € -5% 382,47 € 
Adjustable groove cutterhead 200x8-15 Bore 30mm | Stark
  • -5%

Porte-outils à rainurer

Adjustable groove cutterhead 200x8-15 Bore 30mm

Ref: TH09TM05-30
for high precision groove cutting, chip thickness limitation and reduced recoil, suitable for manual and mechanical feed.
1 en stock
350,00 € -5% 332,50 € 
Adjustable grooving 160 x 4-7.5 Bore 30mm | Stark
  • -5%

Porte-outils à rainurer

Adjustable grooving 160 x 4-7.5 Bore 30mm

Ref: IR20TM01030
Stark Adjustable grooving 160 x 4-7,5 Z=4 V=4
En rupture de stock, veuillez vous renseigner sur le délai de livraison
222,50 € -5% 211,38 € 
Adjustable grooving 160 x 7.5- 14 Bore 30mm | Stark
  • -5%

Porte-outils à rainurer

Adjustable grooving 160 x 7.5- 14 Bore 30mm

Ref: IR20TM02030
Stark Adjustable cutterhead for grooves. 7.5 - 14mm
HW brazed cutter with spurs for making precision grooves with various thickness.The tool is complete with spacing rings.
2 en stock
222,50 € -5% 211,38 € 
Adjustable grooving cutter Bore 30mm TYPE A + B - 180 x 4-15 mm Z8+2 V4 | Stark
  • -5%

Porte-outils à rainurer

Adjustable grooving cutter Bore 30mm TYPE A + B - 180 x 4-15 mm Z8+2 V4

Ref: TH23TM40030
Cutterhead with HW reversible knives and spurs for making thin precision grooves , adjustable by means of spacing rings.  Spacing rings are included.
En rupture de stock, veuillez vous renseigner sur le délai de livraison
470,20 € -5% 446,69 € 
Adjustable grooving cutter bore 30mm TYPE A - 180X4-7.5 Z8 V4 | Stark
  • -5%

Porte-outils à rainurer

Adjustable grooving cutter bore 30mm TYPE A - 180X4-7.5 Z8 V4

Ref: TH23TM05030
Cutterhead with HW reversible knives and spurs for making thin precision grooves , adjustable by means of spacing rings.

Spacing rings are included.
En rupture de stock, veuillez vous renseigner sur le délai de livraison
320,50 € -5% 304,48 € 
Adjustable grooving cutterhead 28 - 55 mm Bore 30mm | Stark
  • -5%

Porte-outils à rainurer

Adjustable grooving cutterhead 28 - 55 mm Bore 30mm

Ref: TH94TM10030
Cutterhead with HW reversible knives and spurs for making precision grooves.
En rupture de stock, veuillez vous renseigner sur le délai de livraison
362,90 € -5% 344,76 € 
Adjustable grooving TYPE A - 160 x 16-30 mm Bore 30mm | Stark
  • -5%

Porte-outils à rainurer

Adjustable grooving TYPE A - 160 x 16-30 mm Bore 30mm

Ref: TH09TM03030
Cutterhead with HW reversible knives and spurs for making thin precision grooves . adjustable by means of spacing rings. Spacing rings are included.
1 en stock
252,40 € -5% 239,78 € 
adjustable grooving TYPE A - 160x 12.4 -24 mm Bore 30mm | Stark
  • -5%

Porte-outils à rainurer

adjustable grooving TYPE A - 160x 12.4 -24 mm Bore 30mm

Ref: TH09TM11030
Cutterhead with steel body. tungsten carbide standard reversible knives and spurs. adjustable with 1/10 mm spacing rings (included) for high precision groove cutting. chip thickness limitation and reduced recoil. suitable for manual and mechanical feed.
1 en stock
224,70 € -5% 213,46 € 
Adjustable jointing cutterhead bore 30mm (type 2) | Stark
  • -5%

Têtes de coupe à jointoyer

Adjustable jointing cutterhead bore 30mm (type 2)

Ref: SH95TM42030
Steel body. standard tungsten carbide profiled knives for high precision jointing in hardwood andsoftwood. suitable for end grain and corner joints (windows). for wood thicknesses 38-94 mm. suitablefor both manual and mechanical feed.
En rupture de stock, veuillez vous renseigner sur le délai de livraison
763,10 € -5% 724,95 € 
Brazed Adjustable grooving 140 x 2,5 - 4,8 Bore 30mm | Stark
  • -5%

Porte-outils à rainurer

Brazed Adjustable grooving 140 x 2,5 - 4,8 Bore 30mm

Ref: IR10TM02030
HW brazed cutter with spurs for making precision grooves with various thickness.The tool is complete with spacing rings.
En rupture de stock, veuillez vous renseigner sur le délai de livraison
250,00 € -5% 237,50 € 
Circular sawblade 250x3,2x30 Z80 PVD | Stark
  • -5%

Lame de scie Pour le bois

Circular sawblade 250x3,2x30 Z80 PVD

Ref: S0525032080C
Lower cutting friction and longer blade life (thanks to the PVD coated teeth)Very high productivity (2 times more than traditional blades)
Suitable for cutting MDF, plastic laminated, hardboard and multilayer panels
4 en stock
44,00 € -5% 41,80 € 
circular sawblade 300 x 30 x 3,2 Z72 | Stark
  • -5%

Lame de scie Pour le bois

circular sawblade 300 x 30 x 3,2 Z72

Ref: S0630032072030
Negative cutting angle. Suitable for cutting MDF, (double faced) plastic laminated, hardboard and multilayer panels.
2 en stock
49,00 € -5% 46,55 € 
Clipping and Miter Saw Blades alternate bevel Negative 254x3.2/2.2x30 Z80 | Stehle
  • -25%

Lame de scie Pour le bois

Clipping and Miter Saw Blades alternate bevel Negative 254x3.2/2.2x30 Z80

Ref: 58110139
• For cross cuts in solid woods and wood-based panels
• High cutting quality and safe handling thanks to negative hook angle
• Low number of teeth for solid wood• High number of teeth for cutting and wood-containing panel materials
1 en stock
160,00 € -25% 120,00 € 
concave and convex quarter rounds (R4-6-8 included) Bore 30mm | Stark
  • -5%

Têtes de coupe quart de rond

concave and convex quarter rounds (R4-6-8 included) Bore 30mm

Ref: YS105BZM030
This set was designed to produce a variety of concave and convex rounds.It consists of a light alloy
cutterhead with two R 4 mm knives mounted on the tool and four spare R 6 and R 8 mm knives.
1 en stock
210,00 € -5% 199,50 € 
Cross grain joint cutter 125X60 Z3 Bore 30mm | Stark
  • -5%

Têtes de coupe à jointoyer

Cross grain joint cutter 125X60 Z3 Bore 30mm

Ref: YH156AAM030
Light alloy body. standard tungsten carbide profiled knives for high precision jointing of hardwood and softwood. chip thickness limitation and reduced recoil. suitable for manual feed. YH152AAM: along the grain joints. YH156AAM: across the grain joints.
En rupture de stock, veuillez vous renseigner sur le délai de livraison
228,70 € -5% 217,27 € 
Cutterhead for door frames with HW knives | Stark
  • -5%

Têtes de coupe pour cadres de fenêtres et de portes

Cutterhead for door frames with HW knives

Ref: SH17TM50030
Cutterhead with HM knives equipped with 3 rings nr. 2-3-4 A and a series of decimal rings with3 mm total thickness B to make 4 different profiles programmed on the 2 fixed wood thicknesses.The head is equipped with radius knives R 3 mm.
Optional are radius knives R 1,5 and R 2 and 45° chamfering.
En rupture de stock, veuillez vous renseigner sur le délai de livraison
746,40 € -5% 709,08 € 
Cutterhead variable angle 160mm Bore 30mm | Stark
  • -5%

Tête de coupe pour biseaux

Cutterhead variable angle 160mm Bore 30mm

Ref: TH17TM20030
Stark cutterhead variable angle 160mm
En rupture de stock, veuillez vous renseigner sur le délai de livraison
425,00 € -5% 403,75 € 
Cutterheads Bore 30mm for windows hardware fittings Type 2 | Stark
  • -5%

Têtes de coupe pour cadres de fenêtres et de portes

Cutterheads Bore 30mm for windows hardware fittings Type 2

Ref: SH04TM05030
Steel body. standard tungsten carbide profiled knives for milling hardwood and softwood. chip thicknesslimitation and reduced recoil. suitable for both manual and mechanical feed.
En rupture de stock, veuillez vous renseigner sur le délai de livraison
421,00 € -5% 399,95 € 
Cutterheads for windows hardware fittings Type 1 | Stark
  • -5%

Têtes de coupe pour cadres de fenêtres et de portes

Cutterheads for windows hardware fittings Type 1

Ref: SH04TM04030
Cutterheads for windows hardware fittings Type 1
En rupture de stock, veuillez vous renseigner sur le délai de livraison
472,00 € -5% 448,40 € 
djustable groove cutterhead TYPE A - 160 x 8-15mm Bore 30mm | Stark
  • -5%

Porte-outils à rainurer

djustable groove cutterhead TYPE A - 160 x 8-15mm Bore 30mm

Ref: TH09TM01030
Cutterhead with steel body, tungsten carbide standard reversible knives and spurs, adjustable with 1/10 mm spacing rings (included) for high precision groove cutting,
En rupture de stock, veuillez vous renseigner sur le délai de livraison
221,60 € -5% 210,52 € 
Multiradius set R12, R15, R18 and R20 mm Bore 30mm | Stark
  • -5%

Têtes de coupe quart de rond

Ensemble multiradius R12, R15, R18 et R20 mm Alésage 30 mm

Ref: YS108BZM-30
Corps en alliage léger avec couteaux profilés standard en carbure de tungstène pour un usinage flexible des quarts de rond. Tous les rayons correspondent à une bague de guidage de 105 mm. Corps équipé de couteaux R 15/20 mm. Profils R 12/18 mm inclus. Limitation de l'épaisseur des copeaux et réduction du recul. Convient à l'avance manuelle.
1 en stock
304,60 € -5% 289,37 € 
ENT slotting cutter 2 mm | ENT
  • -20%

Coupe-disques

ENT slotting cutter 2 mm

Ref: ENT-13940
ENT slotting cutter 2mm for 8mm arbor. With 4 HM cutters. Cutting height 2 mm . Diameter 50.8 mm
1 en stock
37,00 € -20% 29,60 € 
ENT slotting cutter 2.5 mm | ENT
  • -20%

Coupe-disques

ENT slotting cutter 2.5 mm

Ref: ENT-13941
ENT slotting cutter 4mm for 8mm arbor. With 4 HM cutters. Cutting height 2.5 mm . Diameter 50.8 mm
1 en stock
34,00 € -20% 27,20 € 
ENT slotting cutter 5 mm | ENT
  • -20%

Coupe-disques

ENT slotting cutter 5 mm

Ref: ENT-13944
ENT slotting cutter 4mm for 8mm arbor. With 4 HM cutters. Cutting height 5 mm . Diameter 50.8 mm
1 en stock
37,00 € -20% 29,60 €