Promotions

Filtres actifs

  • Longueur de coupe - hauteur :19mm clear
  • Longueur de coupe - hauteur :32mm clear
Bearing guide trimmer D6.35 S12mm for solid surface | Titman Tools
  • -20%

Pour corian / HIMACS

Bearing guide trimmer D6.35 S12mm for solid surface

Ref: XC066-63-12
Bearing guide trimmer Z2 for solid surface
Suitable for

Corian
Hi-Macs
Staron
Avonite
Hanex
Varicor
domovari
En rupture de stock, veuillez vous renseigner sur le délai de livraison
60,00 € -20% 48,00 € 
Finger joint cutter GJ1 | Titman Tools
  • -20%

cutters pour collage adhésif

Finger joint cutter GJ1

Ref: GJ1-12
Finger joint cutter GJ1
En rupture de stock, veuillez vous renseigner sur le délai de livraison
232,00 € -20% 185,60 € 
Guttering cutter R5 S12mm with high cutting length | Titman Tools
  • -20%

Fraises pour joints flexibles

Guttering cutter R5 S12mm with high cutting length

Ref: WRC5-12
Guttering cutter with high cutting length 12 mm Shank
En rupture de stock, veuillez vous renseigner sur le délai de livraison
123,00 € -20% 98,40 € 
Guttering cutter R6 S12mm with high cutting length | Titman Tools
  • -20%

Fraises pour joints flexibles

Guttering cutter R6 S12mm with high cutting length

Ref: WRC6-12
Guttering cutter with high cutting length 12 mm Shank
En rupture de stock, veuillez vous renseigner sur le délai de livraison
132,00 € -20% 105,60 € 
Half round cutter R10 S12mm | Titman Tools
  • -20%

Emporte-pièces demi-ronds

Half round cutter R10 S12mm

Ref: SBC10-12
Premium Half round cutter
En rupture de stock, veuillez vous renseigner sur le délai de livraison
133,00 € -20% 106,40 € 
Profile guide cutter D12,7 S6mm with bearing on shank | Titman Tools
  • -20%

Coupe-bordure droite pour couper

Profile guide cutter D12,7 S6mm with bearing on shank

Ref: PGC12719-6
Trimming cutter with bearing on shank for scanning overhead templates. With centertip for immersion like a drill. Suitable for coated boards. solid woods and wood-basedmaterials.
En rupture de stock, veuillez vous renseigner sur le délai de livraison
71,00 € -20% 56,80 € 
Profile guide cutter D12,7 S8mm with bearing on shank | Titman Tools
  • -20%

Coupe-bordure droite pour couper

Profile guide cutter D12,7 S8mm with bearing on shank

Ref: PGC12719-8
Trimming cutter with bearing on shank for scanning overhead templates. With centertip for immersion like a drill. Suitable for coated boards. solid woods and wood-basedmaterials.
En rupture de stock, veuillez vous renseigner sur le délai de livraison
64,00 € -20% 51,20 € 
Rounding over bit R12,7mm S12mm | Titman Tools
  • -20%

Fraises à rayon concave

Rounding over bit R12,7mm S12mm

Ref: ROCB127-12
Ballbearings diameter 16 mm and 12,7 mm included.
1 en stock
120,00 € -20% 96,00 € 
Rounding over cutter R12 S12mm | Titman Tools
  • -20%

Fraises à rayon concave

Rounding over cutter R12 S12mm

Ref: OC12-12
Rounding over cutter R12 S=12mm
En rupture de stock, veuillez vous renseigner sur le délai de livraison
94,00 € -20% 75,20 € 
Single flute cutter 10mm S12 for solid surface | Titman Tools
  • -20%

Pour corian / HIMACS

Single flute cutter 10mm S12 for solid surface

Ref: XC001-10-12
Single flute cutter Z1 for solid surface
Suitable for

Corian
Hi-Macs
Staron
Avonite
Hanex
Varicor
domovari
2 en stock
50,00 € -20% 40,00 € 
Single flute cutter Z2 Negative D10 L19 S12mm | Titman Tools
  • -20%

Pour corian / HIMACS

Single flute cutter Z2 Negative D10 L19 S12mm

Ref: XC011-10-12
Single flute cutter Z2 Negative for solid surface
Suitable for

Corian
Hi-Macs
Staron
Avonite
Hanex
Varicor
domovari
En rupture de stock, veuillez vous renseigner sur le délai de livraison
49,00 € -20% 39,20 € 
Spiral cutter Negative for Plastics D5 L19 S6mm | Titman Tools
  • -20%

Fraises hélicoïdales Z2

Spiral cutter Negative for Plastics D5 L19 S6mm

Ref: AC5DC-6
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
1 en stock
29,00 € -20% 23,20 € 
Spiral cutter Negative for Plastics D6 L19 S6mm | Titman Tools
  • -20%

Fraises hélicoïdales Z2

Spiral cutter Negative for Plastics D6 L19 S6mm

Ref: AC6DC-6
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
4 en stock
26,00 € -20% 20,80 € 
Spiral cutter Positiv for Plastics D5 L19 S6mm | Titman Tools
  • -20%

Fraises hélicoïdales Z2

Spiral cutter Positiv for Plastics D5 L19 S6mm

Ref: AC5-6
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
1 en stock
32,00 € -20% 25,60 € 
Spiral finishing cutter D10 S10mm downcut Z3 | Titman Tools
  • -20%

3 tranchants hélicoïdaux

Spiral finishing cutter D10 S10mm downcut Z3

Ref: SCF1032-3RN
Spiral finishing cutter downcut Z3
En rupture de stock, veuillez vous renseigner sur le délai de livraison
90,00 € -20% 72,00 € 
Spiral finishing cutter D10 S10mm downcut Z2 | Titman Tools
  • -20%

2 tranchants hélicoïdaux

Spiral finishing cutter D10 S10mm downcut Z2

Ref: SCF1032-2RN
Spiral finishing cutter downcut Z2
En rupture de stock, veuillez vous renseigner sur le délai de livraison
106,00 € -20% 84,80 €