Promotions

Filtres actifs

  • Disponibilité :En stock clear
  • Longueur de coupe - hauteur :25mm clear
Bevel cutter 6° with beveled bearing for solid surface | Titman Tools
  • -20%

Pour corian / HIMACS

Bevel cutter 6° with beveled bearing for solid surface

Ref: XC121-6-12
Bevel cutter with beveled bearing for solid surface
For edging sinks and vanity bowls. The special taper on the Bearing sleeve allows for perfect guide following around the inside of the bowl.
Suitable for

Corian
Hi-Macs
Staron
Avonite
Hanex
Varicor
domovari
1 en stock
126,00 € -20% 100,80 € 
Engraving cutter 60° S8mm | Titman Tools
  • -20%

Fraises à encoche en V

Engraving cutter 60° S8mm

Ref: VGC60SF-8
Engraving cutter 60°
1 en stock
121,00 € -20% 96,80 € 
Fraise à arrondir R12,7 18° S12mm pour Corian | Titman Tools
  • -20%

Pour corian / HIMACS

Fraise à arrondir R12,7 18° S12mm pour Corian

Ref: XC201-127-18-25-12
Fraise à arrondir R12,7 18° S12mm pour Corian
Pour:

Corian
Hi-Macs
Staron
Avonite
Hanex
Varicor
domovari
1 en stock
177,00 € -20% 141,60 € 
Bevel cutter 11° with beveled bearing for solid surface | Titman Tools
  • -20%

Pour corian / HIMACS

Fraise à biseauter 11° avec roulement biseauté pour surfaces solides

Ref: XC121-11-12
Fraise à biseauter avec roulement biseauté pour surfaces solides

Pour le biseautage des éviers et vasques. La conicité spéciale de la bague de roulement assure un guidage parfait le long de la paroi intérieure de la vasque.

Compatible avec :

Corian
Hi-Macs
Staron
Avonite
Hanex
Varicor
Domovari
1 en stock
110,00 € -20% 88,00 € 
Titman dovetail router bit 15° D26 S12mm | Titman Tools
  • -20%

Fraises à queue d'aronde

Fraise à queue d'aronde 15° D26 S12 mm

Ref: DC26-12
Titman DC26 professionnel 26x25 15° avec arbre de 12 mm et diamètre de 26 mm.
1 en stock
115,00 € -20% 92,00 € 
Fraise à rainurer en V 45° S12 | Titman Tools
  • -20%

Fraises à encoche en V

Fraise à rainurer en V 45° S12

Ref: VGC45SF-12
Titman Fraise à rainurer en V 45°  S12
D=44 A=45° L=25 B=35 GL=64 S=12
1 en stock
140,00 € -20% 112,00 € 
Profile guide cutter D16 S8mm | Titman Tools
  • -20%

Coupe-bordure droite pour couper

Profile guide cutter D16 S8mm

Ref: PGC16LK-8
Profile guide cutter with bearing on shank
1 en stock
81,00 € -20% 64,80 € 
Profile guide cutter D25 S8mm | Titman Tools
  • -20%

Coupe-bordure droite pour couper

Profile guide cutter D25 S8mm

Ref: PGC25-8
Profile guide cutter with bearing on shank
2 en stock
127,00 € -20% 101,60 € 
Router bit for Nesting 12x25 S12x40mm | Stark
  • -10%

Nesting

Router bit for Nesting 12x25 S12x40mm

Ref: PD52FD02

For CNC machines
For Cabinet nesting
Machinig operations on MDF and melamine
DP plunging Tip
Sharpening area 2.0 mm
heavy metal body
Feed speed up to 20m/min
1 en stock
315,40 € -10% 283,86 € 
Spiral cutter D6 L20 S6mm Z2 Positive - Upcut | Titman Tools
  • -20%

Fraises hélicoïdales Z2

Spiral cutter D6 L20 S6mm Z2 Positive - Upcut

Ref: PK625-2RP
Spiral cutter Z2 Positive - Upcut for Plastics
Suitable for:

Acrylonitrile butadiene styrene (ABS)
Polycarbonate
Polyethylene
Polypropylene
Polystyrene
Polyvinyl chloride (PVC)
Polymethyl methacrylate (Acrylic. Plexi etc.)
1 en stock
67,00 € -20% 53,60 € 
Spiral cutter D8 L25 S8mm Z2 Positive - Upcut | Titman Tools
  • -20%

Fraises hélicoïdales Z2

Spiral cutter D8 L25 S8mm Z2 Positive - Upcut

Ref: PK825-2RP
Spiral cutter Z2 Positive - Upcut for Plastics
Suitable for:

Acrylonitrile butadiene styrene (ABS)
Polycarbonate
Polyethylene
Polypropylene
Polystyrene
Polyvinyl chloride (PVC)
Polymethyl methacrylate (Acrylic. Plexi etc.)
1 en stock
85,00 € -20% 68,00 € 
Spiral cutter for aluminium Z2 D8 L25 S8mm | Titman Tools
  • -20%

Pour aluminium, ALUCOBOND, DiBOND, REYNOBOND

Spiral cutter for aluminium Z2 D8 L25 S8mm

Ref: AL825-2Z
Solid carbide milling cutter with rounded chip chamber and mirror grinding.Optimized cutting geometry for processing all non-ferrous metals.
1 en stock
98,00 € -20% 78,40 € 
Spiral cutter Negative for Plastics D10 L25 S10mm | Titman Tools
  • -20%

Fraises hélicoïdales Z2

Spiral cutter Negative for Plastics D10 L25 S10mm

Ref: AC10DC-10
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
1 en stock
59,00 € -20% 47,20 € 
Spiral cutter Negative for Plastics D3 L25 S3mm | Titman Tools
  • -20%

Fraises hélicoïdales Z2

Spiral cutter Negative for Plastics D3 L25 S3mm

Ref: AC325DC-3
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
1 en stock
20,00 € -20% 16,00 € 
Spiral cutter Negative for Plastics D8 L25 S8mm | Titman Tools
  • -20%

Fraises hélicoïdales Z2

Spiral cutter Negative for Plastics D8 L25 S8mm

Ref: AC8DC-8
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
1 en stock
41,00 € -20% 32,80 € 
Spiral cutter Positiv for Plastics D10 L25 S10mm | Titman Tools
  • -20%

Fraises hélicoïdales Z2

Spiral cutter Positiv for Plastics D10 L25 S10mm

Ref: AC10-10
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
2 en stock
47,00 € -20% 37,60 € 
Spiral cutter Positiv for Plastics D3 L25 S3mm | Titman Tools
  • -20%

Fraises hélicoïdales Z2

Spiral cutter Positiv for Plastics D3 L25 S3mm

Ref: AC325-3
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
1 en stock
29,00 € -20% 23,20 € 
Spiral cutter Positiv for Plastics D8 L25 S8mm | Titman Tools
  • -20%

Fraises hélicoïdales Z2

Spiral cutter Positiv for Plastics D8 L25 S8mm

Ref: AC8-8
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
1 en stock
42,00 € -20% 33,60 € 
Straight bit 20mm L25 S8mm | Titman Tools
  • -20%

Fraises à rainure droite

Straight bit 20mm L25 S8mm

Ref: M2025-8
Straight bit shank 8mm
2 en stock
79,00 € -20% 63,20 € 
Straight bit 8mm L25 S8mm | Titman Tools
  • -20%

Fraises à rainure droite

Straight bit 8mm L25 S8mm

Ref: M825/70-8
Straight bit shank 8mm
2 en stock
56,00 € -20% 44,80 €