Promotions

Filtres actifs

  • Longueur totale :57mm clear
  • Longueur totale :130mm clear
Arbor for Groovers 6,35mm S8mm | Titman Tools
  • -15%

Coupe-disques

Arbor for Groovers 6,35mm S8mm

Ref: LDTA/8
Arbor inclusive spacers and bearing no. B16 (D = 16).
Suitable for groovers with bore 6,35 mm
1 en stock
30,00 € -15% 25,50 € 
Barley twist cutter BTC2 | Titman Tools
  • -15%

Coupe-tours d'orge

Barley twist cutter BTC2

Ref: BTC2-12
Barley twist cutter BTC2
En rupture de stock, veuillez vous renseigner sur le délai de livraison
127,00 € -15% 107,95 € 
Barley twist cutter BTC6 | Titman Tools
  • -15%

Coupe-tours d'orge

Barley twist cutter BTC6

Ref: BTC6-12
Barley twist cutter BTC6
En rupture de stock, veuillez vous renseigner sur le délai de livraison
127,00 € -15% 107,95 € 
Cove mould cutter R10 S8mm with bearing | Titman Tools
  • -15%

Fraises à rayon convexe

Cove mould cutter R10 S8mm with bearing

Ref: CMC10-8
Cove mould cutter with bearing
En rupture de stock, veuillez vous renseigner sur le délai de livraison
103,00 € -15% 87,55 € 
Cove mould cutter R8 S8mm with bearing | Titman Tools
  • -15%

Fraises à rayon convexe

Cove mould cutter R8 S8mm with bearing

Ref: CMC8-8
Cove mould cutter with bearing
En rupture de stock, veuillez vous renseigner sur le délai de livraison
99,00 € -15% 84,15 € 
PCD Diamond straight router bit D16 B26 S16mm | JVL Tools
  • -20%

Eco-line

Fraise à défoncer diamantée droite D20 B65 S25mm

Ref: 900.20.65.25
Fraise à rainurer diamantée PKD, coupe par le bas. Convient pour le travail du bois, des panneaux composites (MDF, aggloméré), du Trespa, du contreplaqué béton, du plexiglas, de la mélamine et de divers types de plastiques (renforcés).
En rupture de stock, veuillez vous renseigner sur le délai de livraison
169,26 € -20% 135,41 € 
Guide and trim D6 S6 mm | Titman Tools
  • -15%

Coupe-bordure droite pour couper

Guide and trim D6 S6 mm

Ref: GTC6-6
Guide and trim
En rupture de stock, veuillez vous renseigner sur le délai de livraison
55,00 € -15% 46,75 € 
Spiral cutter Negative for Plastics D3 L12 S6mm | Titman Tools
  • -15%

Fraises hélicoïdales Z2

Spiral cutter Negative for Plastics D3 L12 S6mm

Ref: AC3DC-6
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
1 en stock
25,00 € -15% 21,25 € 
Spiral cutter Negative for Plastics D4 L14 S6mm | Titman Tools
  • -15%

Fraises hélicoïdales Z2

Spiral cutter Negative for Plastics D4 L14 S6mm

Ref: AC4DC-6
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
1 en stock
25,00 € -15% 21,25 € 
Spiral cutter Negative for Plastics D5 L19 S6mm | Titman Tools
  • -15%

Fraises hélicoïdales Z2

Spiral cutter Negative for Plastics D5 L19 S6mm

Ref: AC5DC-6
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
1 en stock
25,00 € -15% 21,25 € 
Spiral cutter Negative for Plastics D6 L19 S6mm | Titman Tools
  • -15%

Fraises hélicoïdales Z2

Spiral cutter Negative for Plastics D6 L19 S6mm

Ref: AC6DC-6
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
4 en stock
22,00 € -15% 18,70 € 
Spiral cutter Positiv for Plastics D4 L14 S6mm | Titman Tools
  • -15%

Fraises hélicoïdales Z2

Spiral cutter Positiv for Plastics D4 L14 S6mm

Ref: AC5-6
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
2 en stock
27,00 € -15% 22,95 € 
Spiral cutter Positiv for Plastics D5 L19 S6mm | Titman Tools
  • -15%

Fraises hélicoïdales Z2

Spiral cutter Positiv for Plastics D5 L19 S6mm

Ref: AC5-6
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
1 en stock
27,00 € -15% 22,95 € 
Straight bit 10mm L25 S8mm | Titman Tools
  • -15%

Fraises à rainure droite

Straight bit 10mm L25 S8mm

Ref: M1025-8
Straight bit shank 8mm
En rupture de stock, veuillez vous renseigner sur le délai de livraison
48,00 € -15% 40,80 € 
Straight bit 20mm L25 S8mm | Titman Tools
  • -15%

Fraises à rainure droite

Straight bit 20mm L25 S8mm

Ref: M2025-8
Straight bit shank 8mm
2 en stock
67,74 € -15% 57,58 € 
Straight bit 5mm L20 S8mm | Titman Tools
  • -15%

Fraises à rainure droite

Straight bit 5mm L20 S8mm

Ref: M520-8
Straight bit shank 8mm
En rupture de stock, veuillez vous renseigner sur le délai de livraison
38,00 € -15% 32,30 €