Promotions

Filtres actifs

  • Longueur totale :38 mm clear
  • Longueur totale :88mm clear
Cove mould cutter for solid surface | Titman Tools
  • -20%

Pour corian / HIMACS

Cove mould cutter for solid surface

Ref: XC701-12
Cove mould cutter for solid surface
En rupture de stock, veuillez vous renseigner sur le délai de livraison
103,00 € -20% 82,40 € 
Rounding over bit R1 S6mm | Titman Tools
  • -20%

Fraises à rayon concave

Rounding over bit R1 S6mm

Ref: ROCB1-6
Ballbearings diameter 16 mm and 12,7 mm included.
2 en stock
105,00 € -20% 84,00 € 
Rounding over bit R1 S8mm | Titman Tools
  • -20%

Fraises à rayon concave

Rounding over bit R1 S8mm

Ref: ROCB1-8
Ballbearings diameter 16 mm and 12,7 mm included.
1 en stock
105,00 € -20% 84,00 € 
Single flute cutter 10mm S12 for solid surface | Titman Tools
  • -20%

Pour corian / HIMACS

Single flute cutter 10mm S12 for solid surface

Ref: XC001-10-12
Single flute cutter Z1 for solid surface
Suitable for

Corian
Hi-Macs
Staron
Avonite
Hanex
Varicor
domovari
2 en stock
50,00 € -20% 40,00 € 
Single flute cutter Z2 Negative D10 L19 S12mm | Titman Tools
  • -20%

Pour corian / HIMACS

Single flute cutter Z2 Negative D10 L19 S12mm

Ref: XC011-10-12
Single flute cutter Z2 Negative for solid surface
Suitable for

Corian
Hi-Macs
Staron
Avonite
Hanex
Varicor
domovari
En rupture de stock, veuillez vous renseigner sur le délai de livraison
49,00 € -20% 39,20 € 
Spiral cutter Negative for Plastics D2 L8 S3mm | Titman Tools
  • -20%

Fraises hélicoïdales Z2

Spiral cutter Negative for Plastics D2 L8 S3mm

Ref: AC2-3DC
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
1 en stock
18,00 € -20% 14,40 € 
Spiral cutter Negative for Plastics D2,5 L10 S3mm | Titman Tools
  • -20%

Fraises hélicoïdales Z2

Spiral cutter Negative for Plastics D2,5 L10 S3mm

Ref: AC2.5-3DC
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
1 en stock
20,00 € -20% 16,00 € 
Spiral cutter Positiv for Plastics D2,5 L10 S3mm | Titman Tools
  • -20%

Fraises hélicoïdales Z2

Spiral cutter Positiv for Plastics D2,5 L10 S3mm

Ref: AC2.5-3
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
1 en stock
20,00 € -20% 16,00 € 
Spiral cutter Positiv for Plastics D3 L12 S1/4 inch | Titman Tools
  • -20%

Fraises hélicoïdales Z2

Spiral cutter Positiv for Plastics D3 L12 S1/4 inch

Ref: AC3-1/4
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
1 en stock
14,00 € -20% 11,20 € 
Trimmer D12.7 L38 S12mm with double bearing | Titman Tools
  • -20%

Fraises à arêtes de coupe axiales

Trimmer D12.7 L38 S12mm with double bearing

Ref: BGT903LK-12
Bearing guide cutter with three cutting edges for particularly fine milling results.Equipped with two ball bearings to make prints on sensitive workpieces to avoid.
En rupture de stock, veuillez vous renseigner sur le délai de livraison
132,00 € -20% 105,60 €