Promotions

Filtres actifs

  • Longueur totale :38 mm clear
  • Longueur totale :57mm clear
Arbor for Groovers 6,35mm S8mm | Titman Tools
  • -20%

Coupe-disques

Arbor for Groovers 6,35mm S8mm

Ref: LDTA/8
Arbor inclusive spacers and bearing no. B16 (D = 16).
Suitable for groovers with bore 6,35 mm
1 en stock
37,00 € -20% 29,60 € 
Barley twist cutter BTC2 | Titman Tools
  • -20%

Coupe-tours d'orge

Barley twist cutter BTC2

Ref: BTC2-12
Barley twist cutter BTC2
En rupture de stock, veuillez vous renseigner sur le délai de livraison
149,00 € -20% 119,20 € 
Barley twist cutter BTC6 | Titman Tools
  • -20%

Coupe-tours d'orge

Barley twist cutter BTC6

Ref: BTC6-12
Barley twist cutter BTC6
En rupture de stock, veuillez vous renseigner sur le délai de livraison
149,00 € -20% 119,20 € 
Cove mould cutter R10 S8mm with bearing | Titman Tools
  • -20%

Fraises à rayon convexe

Cove mould cutter R10 S8mm with bearing

Ref: CMC10-8
Cove mould cutter with bearing
En rupture de stock, veuillez vous renseigner sur le délai de livraison
126,00 € -20% 100,80 € 
Cove mould cutter R8 S8mm with bearing | Titman Tools
  • -20%

Fraises à rayon convexe

Cove mould cutter R8 S8mm with bearing

Ref: CMC8-8
Cove mould cutter with bearing
En rupture de stock, veuillez vous renseigner sur le délai de livraison
121,00 € -20% 96,80 € 
Double rounding cutter R2,5 S12mm with bearing | Titman Tools
  • -20%

Emporte-pièces demi-ronds

Double rounding cutter R2,5 S12mm with bearing

Ref: SNCB10-12
Double rounding cutter with bearing
En rupture de stock, veuillez vous renseigner sur le délai de livraison
134,00 € -20% 107,20 € 
Guide and trim D6 S6 mm | Titman Tools
  • -20%

Coupe-bordure droite pour couper

Guide and trim D6 S6 mm

Ref: GTC6-6
Guide and trim
En rupture de stock, veuillez vous renseigner sur le délai de livraison
64,00 € -20% 51,20 € 
Rounding over bit R1 S6mm | Titman Tools
  • -20%

Fraises à rayon concave

Rounding over bit R1 S6mm

Ref: ROCB1-6
Ballbearings diameter 16 mm and 12,7 mm included.
2 en stock
105,00 € -20% 84,00 € 
Rounding over bit R1 S8mm | Titman Tools
  • -20%

Fraises à rayon concave

Rounding over bit R1 S8mm

Ref: ROCB1-8
Ballbearings diameter 16 mm and 12,7 mm included.
1 en stock
105,00 € -20% 84,00 € 
Spiral cutter Negative for Plastics D2 L8 S3mm | Titman Tools
  • -20%

Fraises hélicoïdales Z2

Spiral cutter Negative for Plastics D2 L8 S3mm

Ref: AC2-3DC
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
1 en stock
18,00 € -20% 14,40 € 
Spiral cutter Negative for Plastics D2,5 L10 S3mm | Titman Tools
  • -20%

Fraises hélicoïdales Z2

Spiral cutter Negative for Plastics D2,5 L10 S3mm

Ref: AC2.5-3DC
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
1 en stock
20,00 € -20% 16,00 € 
Spiral cutter Negative for Plastics D3 L12 S6mm | Titman Tools
  • -20%

Fraises hélicoïdales Z2

Spiral cutter Negative for Plastics D3 L12 S6mm

Ref: AC3DC-6
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
1 en stock
29,00 € -20% 23,20 € 
Spiral cutter Negative for Plastics D4 L14 S6mm | Titman Tools
  • -20%

Fraises hélicoïdales Z2

Spiral cutter Negative for Plastics D4 L14 S6mm

Ref: AC4DC-6
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
1 en stock
29,00 € -20% 23,20 € 
Spiral cutter Negative for Plastics D5 L19 S6mm | Titman Tools
  • -20%

Fraises hélicoïdales Z2

Spiral cutter Negative for Plastics D5 L19 S6mm

Ref: AC5DC-6
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
1 en stock
29,00 € -20% 23,20 € 
Spiral cutter Negative for Plastics D6 L19 S6mm | Titman Tools
  • -20%

Fraises hélicoïdales Z2

Spiral cutter Negative for Plastics D6 L19 S6mm

Ref: AC6DC-6
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
4 en stock
26,00 € -20% 20,80 € 
Spiral cutter Positiv for Plastics D2,5 L10 S3mm | Titman Tools
  • -20%

Fraises hélicoïdales Z2

Spiral cutter Positiv for Plastics D2,5 L10 S3mm

Ref: AC2.5-3
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
1 en stock
20,00 € -20% 16,00 € 
Spiral cutter Positiv for Plastics D3 L12 S1/4 inch | Titman Tools
  • -20%

Fraises hélicoïdales Z2

Spiral cutter Positiv for Plastics D3 L12 S1/4 inch

Ref: AC3-1/4
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
1 en stock
14,00 € -20% 11,20 € 
Spiral cutter Positiv for Plastics D4 L14 S6mm | Titman Tools
  • -20%

Fraises hélicoïdales Z2

Spiral cutter Positiv for Plastics D4 L14 S6mm

Ref: AC5-6
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
2 en stock
32,00 € -20% 25,60 € 
Spiral cutter Positiv for Plastics D5 L19 S6mm | Titman Tools
  • -20%

Fraises hélicoïdales Z2

Spiral cutter Positiv for Plastics D5 L19 S6mm

Ref: AC5-6
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
1 en stock
32,00 € -20% 25,60 €