Promotions

Filtres actifs

  • Rayon/angle :2,38mm clear
  • Rayon/angle :2,38mm clear
  • Rayon/angle :10° clear
  • Rayon/angle :80° clear
Bevel cutter 80° S8mm with bearing | Titman Tools
  • -20%

Fraises à chanfreiner

Bevel cutter 80° S8mm with bearing

Ref: BGT80-8
Bevel cutter with bearing
En rupture de stock, veuillez vous renseigner sur le délai de livraison
92,00 € -20% 73,60 € 
Bevel cutter with center tip 10° S8mm | Titman Tools
  • -20%

Fraises à chanfreiner

Bevel cutter with center tip 10° S8mm

Ref: BCF10-8
Bevel cutter with real center cutting edge for direct immersion in the material. For foldingand chamfering wood, laminate and plastic sheets.
En rupture de stock, veuillez vous renseigner sur le délai de livraison
82,00 € -20% 65,60 € 
Dovetail bit 10° D14 S8mm | Titman Tools
  • -20%

Fraises à queue d'aronde

Dovetail bit 10° D14 S8mm

Ref: DC14-8
Dovetail bit HW Z=2 D=14 A=10° L=12 GL=49 S=8mm
1 en stock
61,00 € -20% 48,80 € 
Dovetail bit HW Z2 D20 A10 degrees L16 GL52 S10 | Titman Tools
  • -20%

Fraises à queue d'aronde

Dovetail bit HW Z2 D20 A10 degrees L16 GL52 S10

Ref: DC20-10
Dovetail bit HW Z=2 D=20 A=10 degrees L=16 GL=52 S=10
En rupture de stock, veuillez vous renseigner sur le délai de livraison
73,00 € -20% 58,40 € 
Engraving cutter 80° S8mm | Titman Tools
  • -20%

Fraises à encoche en V

Engraving cutter 80° S8mm

Ref: VGC80-8
Engraving cutter 80°  Shank 8mm
1 en stock
86,00 € -20% 68,80 € 
Rail- & Stile Cutter Chamfer TC. Type C 12 mm shank | ENT
  • -25%

Fraises profilées

Rail- & Stile Cutter Chamfer TC. Type C 12 mm shank

Ref: ENT-17560
Two flutes. With exchangeable ball bearing. The set combines a profile cutter and a slotter. Both on a bearing mounted arbor. Stile and rail are produced by reversing the cutter parts.
For woodthickness from 19 to 21 mm
1 en stock
99,00 € -25% 74,25 € 
Rail- & Stile Cutter Chamfer TC. Type C 8 mm shank | ENT
  • -25%

Fraises profilées

Rail- & Stile Cutter Chamfer TC. Type C 8 mm shank

Ref: ENT-17540
Two flutes. With exchangeable ball bearing. The set combines a profile cutter and a slotter. Both on a bearing mounted arbor. Stile and rail are produced by reversing the cutter parts.
For woodthickness from 19 to 21 mm
1 en stock
93,00 € -25% 69,75 €