ENT

ENT Straight Cutter TC / Two Flutes with grinded bottom cut...

ENT Straight Cutter TC / Two Flutes with grinded bottom cut and 8 mm shank.

ENT 17730 T-slot cutter TC 9.5 mm  with 8 mm shank

ENT 17730 T-slot cutter TC 9.5 mm  with 8 mm shank

ENT trimming cutter TC 9.5 x 25.4 x 68 mm with 8mm shank

ENT trimming cutter TC 9.5 x 25.4 x 68 mm with 8mm shank

ENT 17731 T-slot cutter TC 12.7 mm  with 8 mm shank

ENT 17731 T-slot cutter TC 12.7 mm  with 8 mm shank

Shank 8 mm

Shank 8 mm

ENT Straight Cutter TC / Two Flutes with grinded bottom cut...

ENT Straight Cutter TC / Two Flutes with grinded bottom cut and 8 mm shank.

ENT Straight Cutter TC / Two Flutes with grinded bottom cut...

ENT Straight Cutter TC / Two Flutes with grinded bottom cut and 8 mm shank.

Hinge boring bit with centre point and two bevelled flutes....

Hinge boring bit with centre point and two bevelled flutes. Because of their specially designed cutting edges they allow use on high speed machines up to 27000 rpm. Shank without flat for use on routing machines.

Two flute rounding over cutter with an exchangeable bearing...

Two flute rounding over cutter with an exchangeable bearing with 12.7 mm. For precise and clean rounded edges.

ENT 16200 Dovetail Cutter with Ball Bearing 12mm 14° 

ENT 16200 Dovetail Cutter with Ball Bearing 12mm 14° 

ENT trimming cutter TC 19 x 19 x 62 mm with 8mm shank

ENT trimming cutter TC 19 x 19 x 62 mm with 8mm shank

ENT slotting cutter 4mm for 8mm arbor. With 4 HM cutters....

ENT slotting cutter 4mm for 8mm arbor. With 4 HM cutters. Cutting height 2.5 mm . Diameter 50.8 mm

ENT slotting cutter 4mm for 8mm arbor. With 4 HM cutters....

ENT slotting cutter 4mm for 8mm arbor. With 4 HM cutters. Cutting height 6 mm . Diameter 50.8 mm

ENT slotting cutter 2mm for 8mm arbor. With 4 HM cutters....

ENT slotting cutter 2mm for 8mm arbor. With 4 HM cutters. Cutting height 2 mm . Diameter 50.8 mm

ENT slotting cutter 4mm for 8mm arbor. With 4 HM cutters....

ENT slotting cutter 4mm for 8mm arbor. With 4 HM cutters. Cutting height 5 mm . Diameter 50.8 mm

Straight cutter with two flutes for clean finish. For...

Straight cutter with two flutes for clean finish. For grooving, rebating and mortising. With TC centre tip. The TC centre tip is ideal for plunging and working in abrasive materials such as chipboard, MDF, plywood and hardwood.

ENT 17010 Staff Bead Cutter convex r 3.18 mm with 12 mm shank

ENT 17010 Staff Bead Cutter convex r 3.18 mm with 12 mm shank

Two flute solid carbide spiral bit 5 mm with 8 mm shank....

Two flute solid carbide spiral bit 5 mm with 8 mm shank. Positive (upcut) spiral.

ENT 13821 Chamfer cutter 45 degrees with ball bearing and 8...

ENT 13821 Chamfer cutter 45 degrees with ball bearing and 8 mm shank

Specifically designed for cutting in hinges. stair treads and...

Specifically designed for cutting in hinges. stair treads and the general routing of larger flat bottom areas

Two flute solid carbide spiral bit 3 mm with 8 mm shank....

Two flute solid carbide spiral bit 3 mm with 8 mm shank. Positive (upcut) spiral.

Two flute solid carbide spiral bit 4 mm with 8 mm shank....

Two flute solid carbide spiral bit 4 mm with 8 mm shank. Positive (upcut) spiral.

ENT 13801 Chamfer cutter 45 degrees with ball bearing and 6...

ENT 13801 Chamfer cutter 45 degrees with ball bearing and 6 mm shank

Bottom cutting. suitable for plunge. With 8 mm shank

Bottom cutting. suitable for plunge. With 8 mm shank

Straight cutter with two flutes for clean finish. For...

Straight cutter with two flutes for clean finish. For grooving, rebating and mortising. With TC centre tip. The TC centre tip is ideal for plunging and working in abrasive materials such as chipboard, MDF, plywood and hardwood.

Two flute ogee cutter with exchangeable ball bearing and 8mm...

Two flute ogee cutter with exchangeable ball bearing and 8mm shank

Two flute solid carbide spiral bit 8 mm with 8 mm shank....

Two flute solid carbide spiral bit 8 mm with 8 mm shank. Positive (upcut) spiral.

Straight cutter with two flutes for clean finish. For...

Straight cutter with two flutes for clean finish. For grooving, rebating and mortising. With TC centre tip. The TC centre tip is ideal for plunging and working in abrasive materials such as chipboard, MDF, plywood and hardwood.

ENT 17739 T-groove cutter, Hardmetal, Shank gauge (S) 12 mm,...

ENT 17739 T-groove cutter, Hardmetal, Shank gauge (S) 12 mm, Cutter (D1) 35 mm, (D2) 12.7 mm, (NL1) 18 mm, (NL2) 9.5 mm, SL 40 mm, double-edged

ENT 16690 Rebate Cutter TC with Set of Ball Bearings 34.9 mm...

ENT 16690 Rebate Cutter TC with Set of Ball Bearings 34.9 mm with 8 mm shank