Promotions

Cutterheads Bore 40mm for windows hardware fittings Type 2 | Stark
  • -21%

Têtes de coupe pour cadres de fenêtres et de portes

Cutterheads Bore 40mm for windows hardware fittings Type 2

Ref: SH04TM05040
Steel body. standard tungsten carbide profiled knives for milling hardwood and softwood. chip thicknesslimitation and reduced recoil. suitable for both manual and mechanical feed.
En rupture de stock, veuillez vous renseigner sur le délai de livraison
421,00 € -21% 332,59 € 
Cutterheads Bore 50mm for windows hardware fittings Type 2 | Stark
  • -21%

Têtes de coupe pour cadres de fenêtres et de portes

Cutterheads Bore 50mm for windows hardware fittings Type 2

Ref: SH04TM05050
Steel body. standard tungsten carbide profiled knives for milling hardwood and softwood. chip thicknesslimitation and reduced recoil. suitable for both manual and mechanical feed.
En rupture de stock, veuillez vous renseigner sur le délai de livraison
421,00 € -21% 332,59 € 
Cutterheads for windows hardware fittings Type 1 | Stark
  • -21%

Têtes de coupe pour cadres de fenêtres et de portes

Cutterheads for windows hardware fittings Type 1

Ref: SH04TM04030
Cutterheads for windows hardware fittings Type 1
En rupture de stock, veuillez vous renseigner sur le délai de livraison
472,00 € -21% 372,88 € 
Diamond cut-off disc MetalXcut 125 x 22,2 mm | Mandrex
  • -25%

Disques à tronçonner

Diamond cut-off disc MetalXcut 125 x 22,2 mm

Ref: MDCW125B
FOR ALMOST ANY MATERIAL
The thin walls of the discs ensure quick clean cuts through almost any material including (stainless) steel, cast iron, rebar, masonry and many more.
The Diamond Edge Cut-off discs from Mandrex feature a diamond abrasive edge, combined with a shatter-resistant steel core. This combined, ensures safe operation, reduced dust and debris and an extreme long lifetime.
The Mandrex MetalXcut diamond cut-off discs are designed to retain its cutting power up to 50 times longer than typical bonded abrasive products.
en stock
17,00 € -25% 12,75 € 
Diamond Rounding cuttter 58x10.5x16 R1 CCEN350170 | Wirutex
  • -20%

Porte-outils pour machines Biesse

Diamond Rounding cuttter 58x10.5x16 R1 CCEN350170

Ref: S16920
Diamond Rounding cuttter 58x10.5x16 R1 CCEN350170
For Biesse Akron 1100
En rupture de stock, veuillez vous renseigner sur le délai de livraison
1 100,00 € -20% 880,00 € 
Diamond Rounding cuttter 58x10.5x16 R2 CCEN350169 | Wirutex
  • -20%

Porte-outils pour machines Biesse

Diamond Rounding cuttter 58x10.5x16 R2 CCEN350169

Ref: S16922
PCD Rounding cuttter 58x10.5x16 R=2 CCEN350169 for Biesse
En rupture de stock, veuillez vous renseigner sur le délai de livraison
1 100,00 € -20% 880,00 € 
djustable groove cutterhead TYPE A - 160 x 8-15mm Bore 30mm | Stark
  • -21%

Porte-outils à rainurer

djustable groove cutterhead TYPE A - 160 x 8-15mm Bore 30mm

Ref: TH09TM01030
Cutterhead with steel body, tungsten carbide standard reversible knives and spurs, adjustable with 1/10 mm spacing rings (included) for high precision groove cutting,
En rupture de stock, veuillez vous renseigner sur le délai de livraison
221,60 € -21% 175,06 € 
Double chamfering bit 45° S6mm | Titman Tools
  • -20%

Fraises à chanfreiner

Double chamfering bit 45° S6mm

Ref: DCB16-6
Double chamfering bit HW Z=2+2 A=45 degrees L=15 S=6
en stock
82,00 € -20% 65,60 € 
Double rounding cutter R2,5 S12mm with bearing | Titman Tools
  • -20%

Emporte-pièces demi-ronds

Double rounding cutter R2,5 S12mm with bearing

Ref: SNCB10-12
Double rounding cutter with bearing
En rupture de stock, veuillez vous renseigner sur le délai de livraison
110,00 € -20% 88,00 € 
Double rounding over / chamfer bit adjustable R2.5 45° S8mm | Titman Tools
  • -20%

Fraises à rayon concave

Double rounding over / chamfer bit adjustable R2.5 45° S8mm

Ref: ROS22-8
Cutter for chamfering of material thicknesses from 11 to 22 mm. The cutter isadjusted to the material thickness with the included spacers. By replacing the profile parts. a double rounding cutter is possible.
en stock
129,74 € -20% 103,79 € 
double rounding over bit R3 S8mm | Titman Tools
  • -20%

Fraises à rayon concave

double rounding over bit R3 S8mm

Ref: DCBR16-8
Double rounding over cutters are suitable for panels from 4mm to 9 mm thickness.Ideal for bevel trimming sheets of Trespa, Perspex, wood, Acrylics and hard plastics.
en stock
86,00 € -20% 68,80 € 
Double trimmer D18 S8 mm | Titman Tools
  • -20%

Fraises à arêtes de coupe axiales

Double trimmer D18 S8 mm

Ref: DBGT90-8
for simultaneous machining of top and bottom edges. For material thickness up to 30 mm thickness.
En rupture de stock, veuillez vous renseigner sur le délai de livraison
99,00 € -20% 79,20 € 
Dovetail bit 10° D16 S8mm | Titman Tools
  • -20%

Fraises à queue d'aronde

Dovetail bit 10° D16 S8mm

Ref: DC16-8
Dovetail bit HW Z=2 D=16 A=10 degrees L=16 GL=45 S=8
en stock
44,53 € -20% 35,62 € 
Dovetail bit 10° D14 S8mm | Titman Tools
  • -20%

Fraises à queue d'aronde

Dovetail bit 10° D14 S8mm

Ref: DC14-8
Dovetail bit HW Z=2 D=14 A=10° L=12 GL=49 S=8mm
en stock
41,73 € -20% 33,38 € 
Dovetail bit 10° HW Z2 D20 S8mm | Titman Tools
  • -20%

Fraises à queue d'aronde

Dovetail bit 10° HW Z2 D20 S8mm

Ref: DC20-8
Dovetail bit HW Z=2 D=20 A=10° L=16 GL=52 S=8
en stock
50,25 € -20% 40,20 € 
Dovetail bit 10° Z2 D10 L9 GL45 S8mm | Titman Tools
  • -20%

Fraises à queue d'aronde

Dovetail bit 10° Z2 D10 L9 GL45 S8mm

Ref: DC10-8
Dovetail bit Z=2 D=10 A=10° L=9 GL=45 S=8
en stock
41,00 € -20% 32,80 € 
Dovetail bit 10° Z2 D12 L10 GL46 S8mm | Titman Tools
  • -20%

Fraises à queue d'aronde

Dovetail bit 10° Z2 D12 L10 GL46 S8mm

Ref: DC12-8
Dovetail bit HW Z=2 D=12 A=10° L=10 GL=46 S=8
en stock
41,73 € -20% 33,38 € 
Dovetail bit HW D13.5 A13 degrees L12.5 GL44 S8 | Titman Tools
  • -20%

Fraises à queue d'aronde

Dovetail bit HW D13.5 A13 degrees L12.5 GL44 S8

Ref: DC13.5-8
Dovetail bit HW D=13,5 A=13 degrees L=12,5 GL=44 S=8
En rupture de stock, veuillez vous renseigner sur le délai de livraison
41,73 € -20% 33,38 €