Promotions

Filtres actifs

  • Longueur totale :52mm clear
  • Longueur totale :57mm clear
Arbor for Groovers 6,35mm S8mm
  • -15%

Coupe-disques

Arbor for Groovers 6,35mm S8mm

Ref: LDTA/8
Arbor inclusive spacers and bearing no. B16 (D = 16).
Suitable for groovers with bore 6,35 mm
en stock
30,00 € -15% 25,50 € 
Barley twist cutter BTC2
  • -15%

Coupe-tours d'orge

Barley twist cutter BTC2

Ref: BTC2-12
Barley twist cutter BTC2
En rupture de stock, veuillez vous renseigner sur le délai de livraison
127,00 € -15% 107,95 € 
Barley twist cutter BTC6
  • -15%

Coupe-tours d'orge

Barley twist cutter BTC6

Ref: BTC6-12
Barley twist cutter BTC6
En rupture de stock, veuillez vous renseigner sur le délai de livraison
127,00 € -15% 107,95 € 
Bevel cutter 45° D44 S8mm
  • -15%

Fraises à chanfreiner

Bevel cutter 45° D44 S8mm

Ref: RPC4522-8
Bevel cutter S=8 with high diameter
En rupture de stock, veuillez vous renseigner sur le délai de livraison
108,00 € -15% 91,80 € 
Cove mould cutter R10 S8mm with bearing
  • -15%

Fraises à rayon convexe

Cove mould cutter R10 S8mm with bearing

Ref: CMC10-8
Cove mould cutter with bearing
En rupture de stock, veuillez vous renseigner sur le délai de livraison
103,00 € -15% 87,55 € 
Cove mould cutter R8 S8mm with bearing
  • -15%

Fraises à rayon convexe

Cove mould cutter R8 S8mm with bearing

Ref: CMC8-8
Cove mould cutter with bearing
En rupture de stock, veuillez vous renseigner sur le délai de livraison
99,00 € -15% 84,15 € 
Double rounding cutter R2,5 S12mm with bearing
  • -15%

Emporte-pièces demi-ronds

Double rounding cutter R2,5 S12mm with bearing

Ref: SNCB10-12
Double rounding cutter with bearing
En rupture de stock, veuillez vous renseigner sur le délai de livraison
110,00 € -15% 93,50 € 
Dovetail bit 10° HW Z2 D20 S8mm
  • -15%

Fraises à queue d'aronde

Dovetail bit 10° HW Z2 D20 S8mm

Ref: DC20-8
Dovetail bit HW Z=2 D=20 A=10° L=16 GL=52 S=8
en stock
50,25 € -15% 42,72 € 
Dovetail bit HW Z2 D20 A10 degrees L16 GL52 S10
  • -15%

Fraises à queue d'aronde

Dovetail bit HW Z2 D20 A10 degrees L16 GL52 S10

Ref: DC20-10
Dovetail bit HW Z=2 D=20 A=10 degrees L=16 GL=52 S=10
En rupture de stock, veuillez vous renseigner sur le délai de livraison
50,25 € -15% 42,72 € 
Dowel drill bit D10 L57 S10 mm Lefthand rot.
  • -15%

Pour le bois

Dowel drill bit D10 L57 S10 mm Lefthand rot.

Ref: MB1057LH
Dowel drill bit  S10 mm Lefthand rot.
En rupture de stock, veuillez vous renseigner sur le délai de livraison
35,00 € -15% 29,75 € 
Dowel drill bit D5,5 L57 S10 mm Righthand rot.
  • -15%

Pour le bois

Dowel drill bit D5,5 L57 S10 mm Righthand rot.

Ref: MB5.557RH
Dowel drill bit  S10 mm Righthand rot.
En rupture de stock, veuillez vous renseigner sur le délai de livraison
36,00 € -15% 30,60 € 
Dowel hole drill 5mm shank 8 mm for MAFELL Duo dowel
  • -15%

Pour le bois

Dowel hole drill 5mm shank 8 mm for MAFELL Duo dowel

Ref: MB558RHM
Dowel hole drill shank 8 mm for MAFELL Duo dowel
En rupture de stock, veuillez vous renseigner sur le délai de livraison
28,00 € -15% 23,80 € 
Dowel hole drill 6mm shank 8 mm for MAFELL Duo dowel
  • -15%

Pour le bois

Dowel hole drill 6mm shank 8 mm for MAFELL Duo dowel

Ref: MB658RHM
Dowel hole drill shank 8 mm for MAFELL Duo dowel
En rupture de stock, veuillez vous renseigner sur le délai de livraison
28,00 € -15% 23,80 € 
Dowel hole drill 8mm shank 8 mm for MAFELL Duo dowel
  • -15%

Pour le bois

Dowel hole drill 8mm shank 8 mm for MAFELL Duo dowel

Ref: MB858RHM
Dowel hole drill shank 8 mm for MAFELL Duo dowel
En rupture de stock, veuillez vous renseigner sur le délai de livraison
31,00 € -15% 26,35 € 
Guide and trim D6 S6 mm
  • -15%

Coupe-bordure droite pour couper

Guide and trim D6 S6 mm

Ref: GTC6-6
Guide and trim
En rupture de stock, veuillez vous renseigner sur le délai de livraison
55,00 € -15% 46,75 € 
Profile cutter ROG20
  • -15%

Fraises profilées

Profile cutter ROG20

Ref: ROG20-8
Profile cutter ROG20
En rupture de stock, veuillez vous renseigner sur le délai de livraison
124,00 € -15% 105,40 € 
Rounding over cutter D22 R6,3 S8 mm with guide pin
  • -15%

Fraises à rayon concave

Rounding over cutter D22 R6,3 S8 mm with guide pin

Ref: ROC63-8
Rounding over cutter with guide pin shank 8 mm
En rupture de stock, veuillez vous renseigner sur le délai de livraison
79,00 € -15% 67,15 € 
Rounding over cutter D35 R12,7 S8 mm with guide pin
  • -15%

Fraises à rayon concave

Rounding over cutter D35 R12,7 S8 mm with guide pin

Ref: ROC127-8
Rounding over cutter with guide pin shank 8 mm
En rupture de stock, veuillez vous renseigner sur le délai de livraison
83,00 € -15% 70,55 € 
Spiral cutter Negative for Plastics D3 L12 S6mm
  • -15%

Fraises hélicoïdales Z2

Spiral cutter Negative for Plastics D3 L12 S6mm

Ref: AC3DC-6
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
en stock
25,00 € -15% 21,25 € 
Spiral cutter Negative for Plastics D4 L14 S6mm
  • -15%

Fraises hélicoïdales Z2

Spiral cutter Negative for Plastics D4 L14 S6mm

Ref: AC4DC-6
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
en stock
25,00 € -15% 21,25 € 
Spiral cutter Negative for Plastics D5 L19 S6mm
  • -15%

Fraises hélicoïdales Z2

Spiral cutter Negative for Plastics D5 L19 S6mm

Ref: AC5DC-6
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
en stock
25,00 € -15% 21,25 € 
Spiral cutter Negative for Plastics D6 L19 S6mm
  • -15%

Fraises hélicoïdales Z2

Spiral cutter Negative for Plastics D6 L19 S6mm

Ref: AC6DC-6
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
en stock
22,00 € -15% 18,70 € 
Spiral cutter Positiv for Plastics D4 L14 S6mm
  • -15%

Fraises hélicoïdales Z2

Spiral cutter Positiv for Plastics D4 L14 S6mm

Ref: AC5-6
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
en stock
27,00 € -15% 22,95 €