Prices drop

Active filters

  • Cutting length/height::24,8mm clear
  • Cutting length/height::27mm clear
  • Cutting length/height::60mm clear
  • Cutting length/height::L1(14mm) L2(32mm) clear
  • Cutting length/height::L1(14mm) L2(32mm) clear
  • Cutting length/height::L1(19mm) L2(27mm) clear
  • Cutting length/height::L1(35mm) L2(44mm) clear
  • Cutting length/height::L1(35mm) L2(44mm) clear
  • Cutting length/height::L1(35mm) L2(44mm) clear
Bevel cutter 45° S12mm | Titman Tools
  • -15%

Chamfering bits

Bevel cutter 45° S12mm

Ref: CEC45L-12
For folding, profiling and formatting in one operation.
Out of stock, please inquire about delivery time
€143.00 -15% €121.55 
concave and convex quarter rounds (R4-6-8 included) Bore 30mm | Stark
  • -21%

Quater round cutterheads

concave and convex quarter rounds (R4-6-8 included) Bore 30mm

Ref: YS105BZM030
This set was designed to produce a variety of concave and convex rounds.It consists of a light alloy
cutterhead with two R 4 mm knives mounted on the tool and four spare R 6 and R 8 mm knives.
in stock
€210.00 -21% €165.90 
Concave and convex quarter rounds (R4-6-8 included) Bore 31,75mm | Stark
  • -21%

Quater round cutterheads

Concave and convex quarter rounds (R4-6-8 included) Bore 31,75mm

Ref: YS105BZM031
This set was designed to produce a variety of concave and convex rounds.It consists of a light alloy
cutterhead with two R 4 mm knives mounted on the tool and four spare R 6 and R 8 mm knives.
Out of stock, please inquire about delivery time
€280.00 -21% €221.20 
Concave and convex quarter rounds (R4-6-8 included) Bore 35mm | Stark
  • -21%

Quater round cutterheads

Concave and convex quarter rounds (R4-6-8 included) Bore 35mm

Ref: YS105BZM035
This set was designed to produce a variety of concave and convex rounds.It consists of a light alloy
cutterhead with two R 4 mm knives mounted on the tool and four spare R 6 and R 8 mm knives.
Out of stock, please inquire about delivery time
€280.00 -21% €221.20 
Concave and convex quarter rounds (R4-6-8 included) Bore 40mm | Stark
  • -21%

Quater round cutterheads

Concave and convex quarter rounds (R4-6-8 included) Bore 40mm

Ref: YS105BZM040
This set was designed to produce a variety of concave and convex rounds.It consists of a light alloycutterhead with two R 4 mm knives mounted on the tool and four spare R 6 and R 8 mm knives.
Out of stock, please inquire about delivery time
€280.00 -21% €221.20 
Concave and convex quarter rounds (R4-6-8 included) Bore 50mm | Stark
  • -21%

Quater round cutterheads

Concave and convex quarter rounds (R4-6-8 included) Bore 50mm

Ref: YS105BZM050
This set was designed to produce a variety of concave and convex rounds.It consists of a light alloy
cutterhead with two R 4 mm knives mounted on the tool and four spare R 6 and R 8 mm knives.
Out of stock, please inquire about delivery time
€280.00 -21% €221.20 
Cross grain joint cutter 125X60 Z3 Bore 1-1/4 inch | Stark
  • -21%

lock miter / jointing cutter heads

Cross grain joint cutter 125X60 Z3 Bore 1-1/4 inch

Ref: YH156AAM031
Stark cross grain joint cutter 125X60 Z=3 YH156AAM
Out of stock, please inquire about delivery time
€249.30 -21% €196.95 
Cross grain joint cutter 125X60 Z3 Bore 30mm | Stark
  • -21%

lock miter / jointing cutter heads

Cross grain joint cutter 125X60 Z3 Bore 30mm

Ref: YH156AAM030
Light alloy body. standard tungsten carbide profiled knives for high precision jointing of hardwood and softwood. chip thickness limitation and reduced recoil. suitable for manual feed. YH152AAM: along the grain joints. YH156AAM: across the grain joints.
Out of stock, please inquire about delivery time
€228.70 -21% €180.68 
Cross grain joint cutter 125X60 Z3 Bore 35mm | Stark
  • -21%

lock miter / jointing cutter heads

Cross grain joint cutter 125X60 Z3 Bore 35mm

Ref: YH156AAM035
Stark cross grain joint cutter 125X60 Z=3 YH156AAM
Out of stock, please inquire about delivery time
€249.30 -21% €196.95 
Cross grain joint cutter 125X60 Z3 Bore 40mm | Stark
  • -21%

lock miter / jointing cutter heads

Cross grain joint cutter 125X60 Z3 Bore 40mm

Ref: YH156AAM040
Stark cross grain joint cutter 125X60 Z=3 YH156AAM
Out of stock, please inquire about delivery time
€249.30 -21% €196.95 
Cross grain joint cutter 125X60 Z3 Bore 50mm | Stark
  • -21%

lock miter / jointing cutter heads

Cross grain joint cutter 125X60 Z3 Bore 50mm

Ref: YH156AAM050
Stark cross grain joint cutter 125X60 Z=3 YH156AAM
Out of stock, please inquire about delivery time
€249.30 -21% €196.95 
Eco-Line Mini D10 S12mm PCD router cutter | Wirutex
  • -20%

Eco-line

Eco-Line Mini D10 S12mm PCD router cutter

Ref: S14461
For contouring, boring and sizing panels in chipboard and MDF, unpolished or faced.
Design

PCD tips
HM tungsten carbide plunging tip
Positive and negative shear angle
Sharpening area: 1.0 mm
Feed speed: up to 15 m/min
Max. rpm: 18,000 – 24,000
Minimum material thickness 13 mm
Out of stock, please inquire about delivery time
€65.00 -20% €52.00 
Eco-Line Mini D12 L27 S12mm PCD router cutter | Wirutex
  • -20%

Eco-line

Eco-Line Mini D12 L27 S12mm PCD router cutter

Ref: P03770
For contouring, boring and sizing panels in chipboard and MDF, unpolished or faced.
Design

PCD tips
HM tungsten carbide plunging tip
Positive and negative shear angle
Sharpening area: 1.0 mm
Feed speed: up to 15 m/min
Max. rpm: 18,000 – 24,000
Minimum material thickness 13 mm
Out of stock, please inquire about delivery time
€83.00 -20% €66.40 
Eco-Line Mini D16 L27 S16mm PCD router cutter | Wirutex
  • -20%

Eco-line

Eco-Line Mini D16 L27 S16mm PCD router cutter

Ref: P03810
For contouring, boring and sizing panels in chipboard and MDF, unpolished or faced.
Design

PCD tips
HM tungsten carbide plunging tip
Positive and negative shear angle
Sharpening area: 1.0 mm
Feed speed: up to 15 m/min
Max. rpm: 18,000 – 24,000
Minimum material thickness 13 mm
Out of stock, please inquire about delivery time
€83.00 -20% €66.40 
Eco-Line Mini D18 L27 S20mm PCD router cutter | Wirutex
  • -20%

Eco-line

Eco-Line Mini D18 L27 S20mm PCD router cutter

Ref: P03870
For contouring, boring and sizing panels in chipboard and MDF, unpolished or faced.
Design

PCD tips
HM tungsten carbide plunging tip
Positive and negative shear angle
Sharpening area: 1.0 mm
Feed speed: up to 15 m/min
Max. rpm: 18,000 – 24,000
Minimum material thickness 13 mm
Out of stock, please inquire about delivery time
€83.00 -20% €66.40 
Eco-Line Mini D20 L27 S20mm PCD router cutter | Wirutex
  • -20%

Eco-line

Eco-Line Mini D20 L27 S20mm PCD router cutter

Ref: P03930
For contouring, boring and sizing panels in chipboard and MDF, unpolished or faced.
Design

PCD tips
HM tungsten carbide plunging tip
Positive and negative shear angle
Sharpening area: 1.0 mm
Feed speed: up to 15 m/min
Max. rpm: 18,000 – 24,000
Minimum material thickness 13 mm
Out of stock, please inquire about delivery time
€83.00 -20% €66.40 
Guttering cutter R12,7 S12mm | Titman Tools
  • -15%

Flute & bead bit

Guttering cutter R12,7 S12mm

Ref: TSB254-12
Guttering cutter
Out of stock, please inquire about delivery time
€96.00 -15% €81.60 
PCD router cutter D10 L27 S10mm Eco-Line Mini Z1+1 with HWM body | Wirutex
  • -20%

Eco-line

PCD router cutter D10 L27 S10mm Eco-Line Mini Z1+1 with HWM body

Ref: ES0211
For contouring, boring and sizing panels in chipboard and MDF, unpolished or faced.
PCD router cutters with HWM body which provides greater resistance to vibrations and makes them less prone to breakage than the Eco-line Mini Z1+1.
Design

PCD tips
Cutting edge head in HWM
Positive and negative shear angle
Sharpening area: 1.0 mm
Feed speed: up to 20 m/min
Max. rpm: 18,000 – 24,000
Minimum material thickness 13 mm
Out of stock, please inquire about delivery time
€250.00 -20% €200.00 
PCD router cutter D12 L27 S12mm Eco-Line Mini Z1+1 with HWM body | Wirutex
  • -20%

Eco-line

PCD router cutter D12 L27 S12mm Eco-Line Mini Z1+1 with HWM body

Ref: ES0219
For contouring, boring and sizing panels in chipboard and MDF, unpolished or faced.
PCD router cutters with HWM body which provides greater resistance to vibrations and makes them less prone to breakage than the Eco-line Mini Z1+1.
Design

PCD tips
Cutting edge head in HWM
Positive and negative shear angle
Sharpening area: 1.0 mm
Feed speed: up to 20 m/min
Max. rpm: 18,000 – 24,000
Minimum material thickness 13 mm
Out of stock, please inquire about delivery time
€273.00 -20% €218.40 
PCD router cutter D8 L27 S8mm Eco-Line Mini Z1+1 with HWM body | Wirutex
  • -20%

Eco-line

PCD router cutter D8 L27 S8mm Eco-Line Mini Z1+1 with HWM body

Ref: ES0203
For contouring, boring and sizing panels in chipboard and MDF, unpolished or faced.
PCD router cutters with HWM body which provides greater resistance to vibrations and makes them less prone to breakage than the Eco-line Mini Z1+1.
Design

PCD tips
Cutting edge head in HWM
Positive and negative shear angle
Sharpening area: 1.0 mm
Feed speed: up to 20 m/min
Max. rpm: 18,000 – 24,000
Minimum material thickness 13 mm
Out of stock, please inquire about delivery time
€230.00 -20% €184.00 
Reverse profil bevel cutter 45° S12mm | Titman Tools
  • -15%

Chamfering bits

Reverse profil bevel cutter 45° S12mm

Ref: CECR45L-12
For folding, profiling and formatting in one operation.
Out of stock, please inquire about delivery time
€143.00 -15% €121.55