Prices drop

Active filters

  • Cutting length/height::24,8mm clear
  • Cutting length/height::27mm clear
  • Cutting length/height::65 mm clear
  • Cutting length/height::L1(7mm) L2(17mm) clear
  • Cutting length/height::L1(15mm) L2(23mm) clear
  • Cutting length/height::L1(25mm) L2(29mm) clear
Bevel cutter 45° D63 S12mm
  • -15%

Chamfering bits

Bevel cutter 45° D63 S12mm

Ref: RPC45EL-12
Bevel cutter S=12 with high diameter
Out of stock, please inquire about delivery time
€141.00 -15% €119.85 
concave and convex quarter rounds (R4-6-8 included) Bore 30mm
  • -21%

Quater round cutterheads

concave and convex quarter rounds (R4-6-8 included) Bore 30mm

Ref: YS105BZM030
This set was designed to produce a variety of concave and convex rounds.It consists of a light alloy
cutterhead with two R 4 mm knives mounted on the tool and four spare R 6 and R 8 mm knives.
in stock
€210.00 -21% €165.90 
Concave and convex quarter rounds (R4-6-8 included) Bore 31,75mm
  • -21%

Quater round cutterheads

Concave and convex quarter rounds (R4-6-8 included) Bore 31,75mm

Ref: YS105BZM031
This set was designed to produce a variety of concave and convex rounds.It consists of a light alloy
cutterhead with two R 4 mm knives mounted on the tool and four spare R 6 and R 8 mm knives.
Out of stock, please inquire about delivery time
€280.00 -21% €221.20 
Concave and convex quarter rounds (R4-6-8 included) Bore 35mm
  • -21%

Quater round cutterheads

Concave and convex quarter rounds (R4-6-8 included) Bore 35mm

Ref: YS105BZM035
This set was designed to produce a variety of concave and convex rounds.It consists of a light alloy
cutterhead with two R 4 mm knives mounted on the tool and four spare R 6 and R 8 mm knives.
Out of stock, please inquire about delivery time
€280.00 -21% €221.20 
Concave and convex quarter rounds (R4-6-8 included) Bore 40mm
  • -21%

Quater round cutterheads

Concave and convex quarter rounds (R4-6-8 included) Bore 40mm

Ref: YS105BZM040
This set was designed to produce a variety of concave and convex rounds.It consists of a light alloycutterhead with two R 4 mm knives mounted on the tool and four spare R 6 and R 8 mm knives.
Out of stock, please inquire about delivery time
€280.00 -21% €221.20 
Concave and convex quarter rounds (R4-6-8 included) Bore 50mm
  • -21%

Quater round cutterheads

Concave and convex quarter rounds (R4-6-8 included) Bore 50mm

Ref: YS105BZM050
This set was designed to produce a variety of concave and convex rounds.It consists of a light alloy
cutterhead with two R 4 mm knives mounted on the tool and four spare R 6 and R 8 mm knives.
Out of stock, please inquire about delivery time
€280.00 -21% €221.20 
Eco-Line Mini D10 S12mm PCD router cutter
  • -20%

Eco-line

Eco-Line Mini D10 S12mm PCD router cutter

Ref: S14461
For contouring, boring and sizing panels in chipboard and MDF, unpolished or faced.
Design

PCD tips
HM tungsten carbide plunging tip
Positive and negative shear angle
Sharpening area: 1.0 mm
Feed speed: up to 15 m/min
Max. rpm: 18,000 – 24,000
Minimum material thickness 13 mm
Out of stock, please inquire about delivery time
€65.00 -20% €52.00 
Eco-Line Mini D12 L27 S12mm PCD router cutter
  • -20%

Eco-line

Eco-Line Mini D12 L27 S12mm PCD router cutter

Ref: P03770
For contouring, boring and sizing panels in chipboard and MDF, unpolished or faced.
Design

PCD tips
HM tungsten carbide plunging tip
Positive and negative shear angle
Sharpening area: 1.0 mm
Feed speed: up to 15 m/min
Max. rpm: 18,000 – 24,000
Minimum material thickness 13 mm
Out of stock, please inquire about delivery time
€83.00 -20% €66.40 
Eco-Line Mini D16 L27 S16mm PCD router cutter
  • -20%

Eco-line

Eco-Line Mini D16 L27 S16mm PCD router cutter

Ref: P03810
For contouring, boring and sizing panels in chipboard and MDF, unpolished or faced.
Design

PCD tips
HM tungsten carbide plunging tip
Positive and negative shear angle
Sharpening area: 1.0 mm
Feed speed: up to 15 m/min
Max. rpm: 18,000 – 24,000
Minimum material thickness 13 mm
Out of stock, please inquire about delivery time
€83.00 -20% €66.40 
Eco-Line Mini D18 L27 S20mm PCD router cutter
  • -20%

Eco-line

Eco-Line Mini D18 L27 S20mm PCD router cutter

Ref: P03870
For contouring, boring and sizing panels in chipboard and MDF, unpolished or faced.
Design

PCD tips
HM tungsten carbide plunging tip
Positive and negative shear angle
Sharpening area: 1.0 mm
Feed speed: up to 15 m/min
Max. rpm: 18,000 – 24,000
Minimum material thickness 13 mm
Out of stock, please inquire about delivery time
€83.00 -20% €66.40 
Eco-Line Mini D20 L27 S20mm PCD router cutter
  • -20%

Eco-line

Eco-Line Mini D20 L27 S20mm PCD router cutter

Ref: P03930
For contouring, boring and sizing panels in chipboard and MDF, unpolished or faced.
Design

PCD tips
HM tungsten carbide plunging tip
Positive and negative shear angle
Sharpening area: 1.0 mm
Feed speed: up to 15 m/min
Max. rpm: 18,000 – 24,000
Minimum material thickness 13 mm
Out of stock, please inquire about delivery time
€83.00 -20% €66.40 
Finishing cutter D14 S14mm for through-hole milling Z3
  • -15%

Window and door tooling

Finishing cutter D14 S14mm for through-hole milling Z3

Ref: SLF14120-3RS
Finishing cutter for through-hole milling Z3
For spy hole milling and through holes
Out of stock, please inquire about delivery time
€255.00 -15% €216.75 
Finishing cutter D16 S16mm for through-hole milling Z3
  • -15%

Window and door tooling

Finishing cutter D16 S16mm for through-hole milling Z3

Ref: SLF16120-3RS
Finishing cutter for through-hole milling Z3
For spy hole milling and through holes
Out of stock, please inquire about delivery time
€290.00 -15% €246.50 
Finishing cutter D18 S18mm for through-hole milling Z3
  • -15%

Window and door tooling

Finishing cutter D18 S18mm for through-hole milling Z3

Ref: SLF18120-3RS
Finishing cutter for through-hole milling Z3
For spy hole milling and through holes
Out of stock, please inquire about delivery time
€340.00 -15% €289.00 
Guttering cutter R12,7 S12mm
  • -15%

Flute & bead bit

Guttering cutter R12,7 S12mm

Ref: TSB254-12
Guttering cutter
Out of stock, please inquire about delivery time
€96.00 -15% €81.60 
LOW-NOISE 45 degrees pre-milling cutter 80x65x30+2KN
  • -20%

Cutterheads for Biesse Machines

LOW-NOISE 45 degrees pre-milling cutter 80x65x30+2KN

Ref: S12805
LOW-NOISE 45 degrees pre-milling cutter 80x65x30+2KN.
RT02 pre-milling unit
Out of stock, please inquire about delivery time
€663.00 -20% €530.40 
PCD router cutter D12 L27 S12mm Eco-Line Mini Z1+1 with HWM body
  • -20%

Eco-line

PCD router cutter D12 L27 S12mm Eco-Line Mini Z1+1 with HWM body

Ref: ES0219
For contouring, boring and sizing panels in chipboard and MDF, unpolished or faced.
PCD router cutters with HWM body which provides greater resistance to vibrations and makes them less prone to breakage than the Eco-line Mini Z1+1.
Design

PCD tips
Cutting edge head in HWM
Positive and negative shear angle
Sharpening area: 1.0 mm
Feed speed: up to 20 m/min
Max. rpm: 18,000 – 24,000
Minimum material thickness 13 mm
Out of stock, please inquire about delivery time
€273.00 -20% €218.40 
PCD router cutter D8 L27 S8mm Eco-Line Mini Z1+1 with HWM body
  • -20%

Eco-line

PCD router cutter D8 L27 S8mm Eco-Line Mini Z1+1 with HWM body

Ref: ES0203
For contouring, boring and sizing panels in chipboard and MDF, unpolished or faced.
PCD router cutters with HWM body which provides greater resistance to vibrations and makes them less prone to breakage than the Eco-line Mini Z1+1.
Design

PCD tips
Cutting edge head in HWM
Positive and negative shear angle
Sharpening area: 1.0 mm
Feed speed: up to 20 m/min
Max. rpm: 18,000 – 24,000
Minimum material thickness 13 mm
Out of stock, please inquire about delivery time
€230.00 -20% €184.00 
Roughing cutter D14 S14mm for through-hole milling Z3
  • -15%

Window and door tooling

Roughing cutter D14 S14mm for through-hole milling Z3

Ref: DLF14120-3RS
Roughing cutter for through-hole milling Z3
For pusher hole drilling and lock cylinder milling
Out of stock, please inquire about delivery time
€262.00 -15% €222.70 
Roughing cutter D16 S16mm for through-hole milling Z3
  • -15%

Window and door tooling

Roughing cutter D16 S16mm for through-hole milling Z3

Ref: DLF16120-3RS
Roughing cutter for through-hole milling Z3
For pusher hole drilling and lock cylinder milling
Out of stock, please inquire about delivery time
€299.00 -15% €254.15 
Roughing cutter D18 S18mm for through-hole milling Z3
  • -15%

Window and door tooling

Roughing cutter D18 S18mm for through-hole milling Z3

Ref: DLF18120-3RS
Roughing cutter for through-hole milling Z3
For pusher hole drilling and lock cylinder milling
Out of stock, please inquire about delivery time
€347.00 -15% €294.95